Related papers: Material and Process Tolerant High Efficiency Sola…
A tandem GaAsP/SiGe solar cell has been developed employing group-IV reverse buffer layers grown on silicon substrates with a subsurface porous layer. Reverse buffer layers facilitate a reduction in the threading dislocation density with…
Numerical simulation of a solar cell can provide various information that can be useful to maximize its power conversion efficiency (PCE). In that respect we carried out a set of numerical simulation using AFORS-HET simulation program.…
The active layer microstructure of organic solar cells is critical to efficiency. By studying the photovoltaic properties of organic solar cell's microstructure, it is possible to increase the efficiency of the solar cell. A graph-based…
We present a model for simulating performance of 3D nano -coaxial and -hemispherical thin film solar cells. The material system considered in these simulations is hydrogenated amorphous silicon (a-Si:H), with solar cells fabricated in an…
The capabilities of a simulation tool for the in-depth analysis of the thermal impacts on the performances of solar cells are described. TASC-1D (Thermal Analysis of Solar Cells - 1D, version cSi) solves the coupled electrical, radiative…
Perovskite solar cells (PSCs) without a hole transport layer (HTL) offer a cost-effective and stable alternative to conventional architectures, utilizing only an absorber layer and an electron transport layer (ETL). This study presents a…
Selective solar absorbers (SSAs) with high performance are the key to concentrated solar power systems. Optical metamaterials are emerging as a promising strategy to enhance selective photon absorption, however, the high-temperature…
Kesterite is a leading candidate among inorganic thin-film photovoltaic technologies, offering sustainable and environmentally friendly solutions without reliance on critical raw materials. This study investigates the performance of…
This article addresses the formulation and validation of a simple PC based software application developed for simulating commercially available solar panels. The important feature of this application is its capability to produce speedy…
Solar energy is rapidly becoming a robust renewable energy source to conventional finite resources such as fossil fuels. It is harvested using interconnected photovoltaic panels, typically built with crystalline silicon cells, i.e.…
Solar modules are currently characterized at standard test conditions (STC), defined at 1000W/m2 and 25 {\deg}C. However, solar modules in actual outdoor operating conditions typically operate at lower illumination and higher temperature…
Perovskite/Si tandem solar cells have the potential to considerably out-perform conventional solar cells. Under standard test conditions, perovskite/Si tandem solar cells already outperform the Si single junction. Under realistic…
In the last few years there is an unprecedented progress in the increase of the power conversion efficiency of perovskite solar cells. Evidently, further advances of the efficiency of these devices will depend on the constraints imposed by…
Passive solar desalination is an emerging low-cost technology for fresh water production. State of the art desalinators typically evaporate water using wicking structures to achieve high solar-to-vapor efficiency by minimizing heat loss.…
Elemental selenium is a promising wide-bandgap ($E_\mathrm{G}\approx$ 1.95 eV) photovoltaic material for the next generation of thin-film solar cells. To realize high-efficiency selenium solar cells, it is crucial to optimize the…
Silicon solar cells dominate the solar cell market with record lab efficiencies reaching almost 26%. However, after 60 years of research, this efficiency saturated close to the theoretical limit for silicon, and radically new approaches are…
Environmentally-powered computer systems operate on renewable energy harvested from their environment, such as solar or wind, and stored in batteries. While harvesting environmental energy has long been necessary for small-scale embedded…
The photoelectric conversion efficiency of a solar cell is dependent on its temperature. When the solar radiation is incident on the photovoltaics (PV) panel, a large portion of it is absorbed by the underlying material which increases its…
We report that device architecture engineering has a substantial impact on the reverse bias instability that has been reported as a critical issue in commercializing perovskite solar cells. We demonstrate breakdown voltages exceeding -15 V…
The economic value of a photovoltaic installation depends upon both its lifetime and power conversion efficiency. Progress towards the latter includes mechanisms to circumvent the Shockley- Queisser limit, such as tandem designs and…