Related papers: 23 mJ high-power fiber CPA system using electro-op…
We present a 100 kHz optical parametric chirped pulse amplifier (OPCPA) developed for strong-field attosecond physics and soft-X-ray transient absorption experiments. The system relies on noncollinear potassium titanyl arsenate (KTA)…
We present a near-infrared optical parametric chirped-pulse amplifier (OPCPA) and soft X-ray (SXR) high-harmonic generation system. The OPCPA produces few-cycle pulses at a center wavelength of 800 nm and operates at a high repetition rate…
We report the flexible on-target delivery of 800 nm wavelength, 5 GW peak power, 40 fs duration laser pulses through an evacuated and tightly coiled 10 m long hollow-core nested anti-resonant fiber by positively chirping the input pulses to…
Side-pumping fibre combiners offer several advantages in fibre laser design, including distributed pump absorption, reduced heat load, and improved flexibility and reliability. These benefits are particularly important for all-fibre lasers…
As Ultrafast laser technology advances towards ever higher peak and average powers, generating sub-50 fs pulses from laser architectures that exhibit best power-scaling capabilities remains a major challenge. Here, we present a very compact…
A new amplification method, weaving the three basic compression techniques, Chirped Pulse Amplification (CPA), Optical Parametric Chirped Pulse Amplification (OPCPA) and Plasma Compression by Backward Raman Amplification (BRA) in plasma, is…
In this letter, we investigate a Yb-doped mode-locked fiber oscillator that uses coherent pulse division and recombination to avoid excessive nonlinear phase shifts. The mode-locking mechanism of the laser is based on the accumulation of a…
Ultrafast laser pulses that are both tunable in wavelength and very short in duration are essential tools in fields ranging from biomedical imaging to ultrafast spectroscopy. While resonant dispersive-wave emission in gas-filled hollow-core…
We demonstrate a remarkably effective single-stage compression technique for ultrafast pulses in the visible electromagnetic spectrum using second-harmonic pulses at 515 nmderived from a 1030 nm Yb-based femtosecond regenerative amplifier.…
We report on the design and numerical simulation of a tunable, near-infrared (NIR) femtosecond noncollinear optical parametric amplifier (OPA) seeded by a nonlinear fiber amplifier operating in the parabolic and gain-managed regime. With…
We report the first experimental demonstration of efficient and high-power operation of a Ti:sapphire laser pumped by a simple, compact, continuous-wave (cw) fiber-laser-based green source. The pump radiation is obtained by direct…
Laser plasma acceleration at kilohertz repetition rate has recently been shown to work in two different regimes, with pulse lengths of either 30 fs or 3.5 fs. We now report on a systematic study in which a large range of pulse durations and…
We propose a new method for laser pulse compression that uses the spatially varying dispersion of a plasma plume with a density gradient. This novel scheme can be used to compress ultrahigh power lasers. A long, negatively…
Laser-plasma accelerators (LPAs), producing high-quality electron beams, provide an opportunity to reduce the size of free-electron lasers (FELs) to only a few meters. A complete system is proposed here, which is based on FEL technology and…
Ultra-high frequency acoustic resonances ($\backsim$2 GHz) trapped within the glass core ($\backsim$1 $\mu$m diameter) of a photonic crystal fiber are selectively excited through electrostriction using laser pulses of duration 100 ps and…
We report the amplification of an all-normal dispersion supercontinuum pulse in a Thulium / Holmium co-doped all-fiber chirped pulse amplification system. With a -20 dB bandwidth of more than 300 nm in the range 1800-2100 nm the system…
While dissipative soliton operation has successfully improved the pulse energy of 1 {\mu}m and 1.5 {\mu}m fiber lasers to tens of nanojoules, it is still hard to scale the pulse energy of dissipative solitons at 2 {\mu}m due to the…
We describe a fiber Raman amplifier for nanosecond and sub-nanosecond pulses centered around 1260 nm. The amplification takes place inside a 4.5-m-long polarization-maintaining phosphorus-doped fiber, pumped at 1080 nm by 3-ns-long pulses…
Absolute output power optimization and performance of a near- to mid-infrared picosecond optical parametric oscillator (OPO) is studied at two high pump powers using a widely-tunable output coupling (OC) technique which provides 15% to 68%…
We report watt-level femtosecond pulses in the 1.75 $\mu$m region using a thulium-doped core, terbium-doped cladding fluoride (Tm:Tb:ZBLAN) fiber laser system. The seed pulse is generated through stimulated Raman scattering in a silica…