Related papers: Stabilizing Multimode Hopping Oscillations and Red…
We use theoretical analysis and numerical simulation to investigate the operation of a laser oscillating from gain supplied by stimulated Brillouin scattering (SBS) in a microresonator. The interaction of the forward, backward, and density…
We demonstrate laser frequency stabilization with at least 6 GHz of offset tunability using an in-phase/quadrature (IQ) modulator to generate electronic sidebands (ESB) on a titanium sapphire laser at 714 nm and we apply this technique to…
In practical applications to free-space quantum communications, the utilization of active beam coupling and stabilization techniques offers notable advantages, particularly when dealing with limited detecting areas or coupling into…
We present the design methodology and characterization of a superconducting magnetic bearing (SMB) system for the polarization modulator in the SAT-LF, one of the small aperture telescopes (SATs) in the Simons Observatory (SO) that is…
Erbium-doped lithium niobate on insulator (Er:LNOI) is a promising platform for photonic integrated circuits as it adds gain to the LNOI system and enables on-chip lasers and amplifiers. A challenge for Er:LNOI laser is to increase its…
We have developed a linearly-polarized Ytterbium-doped fiber ring laser with single longitudinal-mode output at 1064nm for LISA and other space applications. Single longitudinal-mode selection was achieved by using a fiber Bragg grating…
We previously showed how the measurements of some eighteen time series of relative frequency or phase shifts could be combined (1) to cancel the phase noise of the lasers, (2) to cancel the Doppler fluctuations due to non-inertial motions…
The remote synchronization of oscillators is essential for improving the performance, efficiency, and reliability of various systems and technologies, ranging from everyday telecommunications to cutting-edge scientific research and emerging…
We investigate theoretically the influence of laser phase noise on the cooling and heating of a generic cavity optomechanical system. We derive the back-action damping and heating rates and the mechanical frequency shift of the radiation…
Weakly scattering random lasers exhibit lasing modes that spatially overlap and can interact strongly via gain saturation. Consequently, lasing in high-threshold modes may be suppressed by strong low-threshold lasing modes. We numerically…
A neighborhood restricted Mixed Gibbs Sampling (MGS) based approach is proposed for low-complexity high-order modulation large-scale Multiple-Input Multiple-Output (LS-MIMO) detection. The proposed LS-MIMO detector applies a neighborhood…
Multimode squeezed light is a key resource for high-dimensional quantum technologies, enhancing metrological sensitivity, boosting communication security, and enabling parallel processing in computation. Its practical potential, however,…
Three-mode parametric instability is a threat to attaining design power levels in Advanced gravitational wave detectors. The first observation of three-mode parametric instability in a long optical cavity revealed that instabilities could…
In precision force sensing of multi-mechanical mode optomechanical systems, coherent interference can decouple certain degenerate vibrational modes from the cavity field, leading to incomplete information regarding the measured signal. In…
We introduce a noise-aware extension to the parametric maximum-likelihood framework for component separation by modeling correlated $1/f^\alpha$ noise as a harmonic-space power law. This approach addresses a key limitation of existing…
We show that the emission of broad area semiconductor amplifiers and lasers can be efficiently stabilized by introducing, two-dimensional periodic modulations simultaneously on both the refractive index and the pump (gain-loss) profiles, in…
We study a fully on-fiber optomechanical cavity and characterize its performance as a sensor. The cavity is formed by patterning a suspended metallic mirror near the tip of an optical fiber and by introducing a static reflector inside the…
Hyperparameter optimization (HPO) is a powerful technique for automating the tuning of machine learning (ML) models. However, in many real-world applications, accuracy is only one of multiple performance criteria that must be considered.…
Homogeneous observer for linear multi-input multi-output (MIMO) system is designed. A prefilter of the output is utilized in order to improve robustness of the observer with respect to measurement noises. The use of such a prefilter also…
The dynamics of power distribution between longitudinal modes of a multimode semiconductor laser subjected to external optical feedback is experimentally analyzed in the low-frequency fluctuation regime. Power dropouts in the total light…