Related papers: Reflective Parametric Frequency Selective Limiters…
A new method is discussed for the systematic synthesis, design and performance optimization of varactor-based parametric frequency dividers (PFDs) exhibiting an ultra-low power threshold ($P_{th}$). For the first time, it is analytically…
A polarization-independent reconfigurable frequency selective rasorber (FSR)/absorber with low insertion loss based on diodes is proposed in this paper. The presented structure consists of a lossy layer based on square loops and a bandpass…
This work discusses the suitability of typical power line communication (PLC) pulses for fault sensing in power lines via pulse-compression time-domain reflectometry (TDR). For this purpose, we first carefully outline a TDR system operating…
Power limiters are essential devices in modern radio frequency (RF) communications systems to protect highly sensitive input channels from large incoming signals. Nowadays-used semiconductor limiters suffer from high electronic noise and…
A metallic ring based, diode-integrated, low-profile, power-dependent, reflective metasurface working from 3 GHz to 3.6 GHz is proposed in this letter. Unlike the previous study which shifts a band up and down to change the impedance of the…
This work presents a switchable frequency-selective rasorber (SFSR) with two operating modes. Switching from transmission to reflection can be achieved by appropriately adding feeders and PIN diodes based on cascaded two-dimensional lossy…
Protecting superconducting quantum circuits from non-ideal return loss, including out-of-band circulator behavior and enhancing the performance of broadband quantum-limited amplifiers can be accomplished using a superconducting version of a…
We report on a new class of Ising Machines (IMs) that rely on coupled parametric frequency dividers (PFDs) as macroscopic artificial spins. Unlike the IM counterparts based on subharmonic injection locking (SHIL), PFD IMs do not require…
A directional superconducting parametric amplifier in the GHz frequency range is designed and analyzed, suitable for low-power read-out of microwave kinetic inductance detectors employed in astrophysics and when combined with a…
The paper presents a reflectionless stripline filter with reduced dimensions having a single bandwidth over a wide frequency range. The filter consists of coupled strip lines and RLC circuits included in the diagonal ports of the coupled…
We report on the development of transmission-line reflectionless filters operating with passbands at 100 GHz and 230 GHz, and stopband absorption up to 500 GHz, the highest operating frequencies yet recorded for such filters. The designs…
In this paper, a switchable 3-D frequency selective rasorber (FSR) with wide absorption bands without lumped components or commercial magnetic absorbers is presented and investigated. The absorption path is constructed by embedding a hybrid…
Microstrip three-way (that is, 4.8 dB) integrated filtering power divider (FPD) is presented in this paper. The proposed FPD evenly distributes an input power signal into three equal output signals. The design incorporates balanced signal…
A hemispherical multilayer wide-band (7-13 GHz) band-pass frequency selective surface (FSS) is reported. A new design technique based on a Goldberg discretization and unit cell scaling technique is introduced to accommodate the curved…
We report on the development of a frequency modulatable 795 nm semiconductor laser based on self-injection locking to a high quality factor whispering gallery mode microresonator. The laser is characterized with residual amplitude…
The paper addresses the boundary control of a class of hyperbolic PDEs, based on an equivalent representation in terms of an integral-difference equation. The situation is considered where direct compensation of reflection terms induces a…
We demonstrate a fiber Fabry-Perot (FFP) sensor capable of detecting sub-picostrain signals, from 100 Hz and extending beyond 100 kHz, using the Pound-Drever-Hall frequency locking technique. A low power diode laser at 1550 nm is locked to…
Single-ended circuit topologies, and a theorem for the development thereof, are presented with which one may realize constant-resistance (or reflectionless) filters, having ideally zero reflection coefficient at all frequencies and from all…
We design, test, and analyze fiber-optic voltage sensors based on optical reflection from a piezoelectric transducer. By controlling the physical dimensions of the device, we can tune the frequency of its natural resonance to achieve a…
The accurate modeling of reflection coefficients is pivotal for developing reliable channel models in emerging terahertz (THz) communications. This study establishes a 300$\sim$400 GHz channel measurement platform to measure the reflection…