Related papers: Rate-dependent adhesion of viscoelastic contacts. …
Application of the principle of energy balance to a rigid indenter in contact with elastic layer on a flat rigid substrate provides a very simple derivation of the detachment criterion which earlier has been obtained by much more…
In Part I of this two part series, we presented a multi-neighbor dependent contact model for adhesive elastic-plastic particles built upon the method of dimensionality reduction that is valid for the elastic and fully-plastic contact…
The modelling of the adherence energy during peeling of Pressure Sensitive Adhesives (PSA) has received much attention since the 1950's, uncovering several factors that aim at explaining their high adherence on most substrates, such as the…
High-frequency micrometrical vibrations have been shown to greatly influence the adhesive performance of soft interfaces, however a detailed comparison between theoretical predictions and experimental results is still missing. Here, the…
A dynamic wetting problem is studied for a moving thin fiber inserted in fluid and with a chemically inhomogeneous surface. A reduced model is derived for contact angle hysteresis by using the Onsager principle as an approximation tool. The…
Frictional properties of contacts between a smooth viscoelastic rubber and rigid surfaces are investigated using a torsional contact configuration where a glass lens is continuously rotated on the rubber surface. From the inversion of the…
In this paper, we consider a contact problem with adhesion between a viscoelastic body and a rigid support, taking thermal effects into account. The PDE system we deal with is derived within the modelling approach proposed by M. Fremond…
Current engineering wear models are often based on empirical parameters rather than built upon physical considerations. Here, we look for a physical description of adhesive wear at the microscale, at which the interaction between two…
The equilibrium contact angle of a droplet resting on a solid substrate can reveal essential properties of the solid's surface. However, when the motion of a droplet on a surface shows significant hysteresis, it is generally accepted that…
We develop a model which predicts the contact angle hysteresis introduced by smooth micropatterned defects. The defects are modeled by a smooth function and the contact angle hysteresis is explained using a tangent line solution. When the…
We show that the detachment of a flat punch from a viscoelastic substrate has a relatively simple behavior, framed between the Kendall's elastic solution at the relaxed modulus and at the instantaneous modulus, and the cohesive strength…
Dissipation and adhesion are important in many areas of materials science, including friction and lubrication, cold spray deposition, and micro-electromechanical systems (MEMS). Another interesting problem is the adhesion of mineral grains…
Motivated by roughness-induced adhesion enhancement (toughening and strengthening) in low modulus materials, we study the detachment of a sphere from a substrate in the presence of both viscoelastic dissipation at the contact edge, and…
Friction in static and sliding contact of rough surfaces is important in numerous physical phenomena. We seek to understand macroscopically observed static and sliding contact behavior as the collective response of a large number of…
Understanding surface mechanics of soft solids, such as soft polymeric gels, is crucial in many engineering processes, such as dynamic wetting and adhesive failure. In these situations, a combination of capillary and elastic forces drives…
We investigate the influence of viscoelastic nature of the adhesive on the intermittent peel front dynamics by extending a recently introduced model for peeling of an adhesive tape. As time and rate-dependent deformation of the adhesives…
The adhesive contact between elastic solids with randomly rough, self affine fractal surfaces is studied by molecular dynamics (MD) simulations. The interfacial binding energy obtained from the simulations of nominally flat and curved…
A new continuous contact force model for contacting problems with regular or irregular contacting surfaces and energy dissipations in multibody systems is presented and discussed in this work. The model is developed according to Hertz law…
In this two part series, we present a contact model able to capture the response of interacting adhesive elastic-perfectly plastic particles under a variety of loadings. In Part I, we focus on elastic through fully-plastic contact with and…
In the classic theory of solid adhesion, surface energy drives deformation to increase contact area while bulk elasticity opposes it. Recently, solid surface stress has been shown also to play an important role in opposing deformation of…