Related papers: Advances in secondary ion mass spectroscopy
Positronium is an ideal system for the research of the bound state QED. New precise measurement of orthopositronium decay rate has been performed with an accuracy of 150 ppm, and the result combined with the last three is 7.0401 +- 0.0007…
Scanning Electron Microscopy (SEM) is critical in nanotechnology, materials science, and biological imaging due to its high spatial resolution and depth of focus. Signal-to-noise ratio (SNR) is an essential parameter in SEM because it…
Nuclear magnetic resonance (NMR) imaging with nanometer resolution requires new detection techniques with sensitivity well beyond the capability of conventional inductive detection. Here, we demonstrate two dimensional imaging of $^1$H NMR…
As progress towards real implementations of cryogenic high gradient normal conducting accelerating cavities continues, a more mature understanding of the surface physics in this novel environment becomes increasingly necessary. To this end,…
Nanoscale defect structure within the magnetic penetration depth of ~100nm is key to the performance limitations of niobium superconducting radio frequency (SRF) cavities. Using a unique combination of advanced thermometry during cavity RF…
Bounds on the amplitude of a scale-invariant stochastic primordial magnetic field (PMF) can be significantly improved by measurements of the Faraday Rotation (FR) of CMB polarization. The mode-coupling correlations induced by FR make it…
Identifying the loss mechanisms of niobium cavities enables an accurate determination of applications for future accelerator projects and points to research topics required to mitigate current limitations. For several cavities an increasing…
Nanoscale fabrication and characterisation techniques critically underpin a vast range of fields, including materials science, nanoelectronics and nanobiotechnology. Focused ion beam (FIB) techniques are particularly appealing due to their…
We investigate the effect of high temperature treatments followed by only high-pressure water rinse (HPR) of superconducting radio frequency (SRF) niobium cavities. The objective is to provide a cost effective alternative to the typical…
Nb$_3$Sn is currently the most promising material other than niobium for future superconducting radiofrequency cavities. Critical fields above 120 mT in pulsed operation and about 80 mT in CW have been achieved in cavity tests. This is…
Nuclear magnetic resonance (NMR) spectroscopy is widely used in fields ranging from chemistry, material science to neuroscience. Nanoscale NMR spectroscopy using Nitrogen-vacancy (NV) centers in diamond has emerged as a promising platform…
Solid state defects such as nitrogen vacancy (NV) centers in diamond have been utilized for NMR sensing at ambient temperatures for samples at the nano-scale and up to the micro-scale. Similar to standard NMR, NV-sensitivities can be…
We study the microwave impedance of extremely high aspect ratio (length/width ~ 5,000) superconducting niobium nitride nanowires. The nanowires are fabricated in a compact meander geometry that is in series with the center conductor of a 50…
Particle physics and radio-frequency (RF) superconductivity have driven each other on since the 1970s. The unique properties of superconductors (SC) have been the enabling keys for the realization of accelerators with always increased…
This work highlights the possibility of improving the quantification aspect of Cs-complex ions in SIMS (Secondary Ion Mass Spectrometry), by combining the intensities of all possible Cs-complexes. Identification of all possible Cs-complexes…
A compact resonance ionization mass spectrometer is developed using two laser diodes and a quadrupole mass spectrometer to perform trace element analysis of potassium. With the help of a narrow linewidth of the laser diode, the isotope…
On-chip actuation and readout of mechanical motion is key to characterize mechanical resonators and exploit them for new applications. We capacitively couple a silicon nitride membrane to an off resonant radio-frequency cavity formed by a…
Plasma based surface modification of niobium is a promising alternative to wet etching of superconducting radio frequency (SRF) cavities. The development of the technology based on Cl2/Ar plasma etching has to address several crucial…
Recently, we reported an ion trap experiment with an integrated time-of-flight mass spectrometer (TOFMS) [Phys. Rev. Appl. 2, 034013 (2014)] focussing on the improvement of mass resolution and detection limit due to sample preparation at…
A single channel, high precision ionization chamber has been built for monitoring the relative intensity of X-rays in the energy range above 5 keV. It can be used in experiments, such as EXAFS, where simultaneous high precision monitoring…