Related papers: A hybrid-integrated diode laser in the visible spe…
Hollow core antiresonant fibers offer new possibilities in the near infrared and visible spectral range. I show here that the great flexibility of this technology can allow the design and fabrication of hollow core optical fibers with an…
Light-emitting diodes (LEDs) based on III-V/II-VI materials have delivered a compelling performance in the mid-infrared (mid-IR) region, which enabled wide-ranging applications, including environmental monitoring, defense and medical…
We describe a tunable broadband mid-infrared laser source based on difference-frequency mixing of a 100 MHz femtosecond Yb:fiber laser oscillator and a Raman-shifted soliton generated with the same laser. The resulting light is tunable over…
A Si-based monolithic laser is highly desirable for full integration of Si-photonics. Lasing from direct bandgap group-IV GeSn alloy has opened a completely new venue from the traditional III-V integration approach. We demonstrated…
Erbium (Er) ions are the gain medium of choice for fiber-based amplifiers and lasers, offering a long excited-state lifetime, slow gain relaxation, low amplification nonlinearity and noise, and temperature stability compared to…
The integration of active light-emitting elements into planar photonic circuits on a silicon nitride platform remains challenging due to material incompatibilities and high-temperature processing. Proposed hybrid method embeds monodisperse…
Millimeter-wave (mmWave,>30 GHz) radars are the key enabler in the coming 6G era for high-resolution sensing and detection of targets. Photonic radar provides an effective approach to overcome the limitations of electronic radars thanks to…
A 16-channel optical phased array is fabricated on a gallium arsenide photonic integrated circuit platform with a low-complexity process. Tested with a 1064 nm external laser, the array demonstrates 0.92{\deg} beamwidth, 15.3{\deg}…
By coupling silicon nanowires (~150 nm diameter, 20 micron length) with an {\Omega}-shaped plasmonic nanocavity we are able to generate broadband visible luminescence, which is induced by high-order hybrid nanocavity-surface plasmon modes.…
For the purpose of withstanding very high radiation doses, silicon pixel sensors with a 3D electrode geometry are being developed. Detectors of this kind are highly interesting for harch radiation environments such as expected in the High…
Accurate 3D imaging is essential for machines to map and interact with the physical world. While numerous 3D imaging technologies exist, each addressing niche applications with varying degrees of success, none have achieved the breadth of…
Black phosphorous (BP), a two-dimensional (2D) material, has a direct bandgap, which fills up the bandgap lacuna left by graphene topological insulators and transition-metal dichalcogenides because of its dependence on the layers and…
Silicon photonics is being extended from the near-infrared (near-IR) window of 1.3-1.5 {\mu}m for optical fiber communications to the mid-infrared (mid-IR) wavelength-band of 2 {\mu}m or longer for satisfying the increasing demands in many…
We demonstrate a diode laser system which is suitable for high-resolution spectroscopy in the 1200 nm and yellow spectral ranges. It is based on a two-facet quantum dot chip in a Littrow-type external cavity configuration. The laser is…
We report an approach for high-resolution spectroscopy using a widely tunable laser emitting in the molecular fingerprint region. The laser is based on difference-frequency generation (DFG) in a nonlinear orientation-patterned GaAs crystal.…
We report the operation of an optical parametric amplifier (OPA) capable of producing gigawatt peak-power laser pulses with tunable wavelength in either the visible or near-infrared spectrum. The OPA has two distinct operation modes (i)…
In this paper, we demonstrate the integration of photonic devices on sapphire substrates using multi-layer depressed cladding waveguides at both 780 nm and 1550 nm. The devices are up to 10-cm long and written at depths down to 400 um. The…
We report on the study of the third-order nonlinear optical interactions in In$_{x}$Ga$_{1-x}$As$_{y}$P$_{1-y}$/InP strip-loaded waveguides. The material composition and waveguide structures were optimized for enhanced nonlinear optical…
Optical modulators are at the heart of optical communication links. Ideally, they should feature low insertion loss, low drive voltage, large modulation bandwidth, high linearity, compact footprint and low manufacturing cost. Unfortunately,…
Laser beam scanning is central to many applications, including displays, microscopy, three-dimensional mapping, and quantum information. Reducing the scanners to microchip form factors has spurred the development of very-large-scale…