Related papers: Direct Numerical Simulation of the Moist Stably St…
Using Molecular Dynamics simulations of a polymer liquid flowing past flat and patterned surfaces, we investigate the influence of corrugation, wettability and pressure on slippage and friction at the solid-liquid interface. For…
Direct numerical simulations of fully-developed turbulent channel flows with wavy walls are undertaken. The wavy walls, skewed with respect to the mean flow direction, are introduced as a means of emulating a Spatial Stokes Layer (SSL)…
Direct numerical simulation (DNS) of flow in a turbulent channel with a random rough wall is performed at $Re_{\tau}=400$ and $600$. The roughness geometry corresponds to the experiments of Flack and Schultz (personal communication). The…
Supersonic lean premixed hydrogen/air combustion stabilised by a cavity-flame holder within a model scramjet, characterized by a Mach 1.5 inflow at 1000 K and 50 kPa, is investigated via direct numerical simulation. By separately…
Direct numerical simulations (DNS) of particle-laden turbulent flow in straight, mildly curved and strongly bent pipes are performed in which the solid phase is modelled as small heavy spherical particles. A total of seven populations of…
With the aim of assessing internal wave-driven mixing in the ocean, we develop a new technique for direct numerical simulations of stratified turbulence. Since the spatial scale of oceanic internal gravity waves is typically much larger…
Evidence from seismic studies, mineral physics, thermal evolution models and geomagnetic observations is inconclusive about the presence of a stably stratified layer at the top of the Earth's fluid outer core. Such a convectively stable…
This review focuses on Direct numerical simulations (DNS) of turbulent flows laden with droplets or bubbles. DNS of these flows are more challenging than those of flows laden with solid particles due to the surface deformation in the…
A nearly half-cubic hectometer of deep Mediterranean-Sea waters is yearlong sampled with about 3000 high-resolution temperature sensors to study different sources of turbulent waterflows, which are vital for life. Although temperature…
The effect of a network of fixed rigid fibers on fluid flow is investigated by means of three-dimensional direct numerical simulations using an immersed boundary method for the fluid-structure coupling. Different flows are considered (i.e.,…
In particle-laden turbulent wall flows, lift forces can influence the near-wall turbulence. This has been recently observed in particle-resolved simulations, which, however, are too expensive to be used in upscaled models. Instead,…
Fluids at supercritical pressures exhibit large variations in density near the pseudo critical line, such that buoyancy plays a crucial role in their fluid dynamics. Here, we experimentally investigate heat transfer and turbulence in…
This paper is the first part of a two-fold study of mixing, i.e. the formation of layers and upwelling of buoyancy, in axially stratified Taylor--Couette flow, with fixed outer cylinder. Using linear analysis and direct numerical…
We investigate the coupling effects of the two-phase interface, viscosity ratio, and density ratio of the dispersed phase to the continuous phase on the flow statistics in two-phase Taylor-Couette turbulence at a system Reynolds number of…
Mixing at the interface between a convection zone and an adjacent, stably-stratified layer plays a crucial role in shaping the structure and evolution of stars and planets. In this work, we present a suite of 2D and 3D Boussinesq…
We investigate experimentally phenomenon of turbulent thermal diffusion of micron-size solid particles in an inhomogeneous convective turbulence forced by one vertically-oriented oscillating grid in an air flow. This effect causes formation…
The impact of turbulent fluctuations on the forces exerted by a fluid on a towed spherical particle is investigated by means of high-resolution direct numerical simulations. The measurements are carried out using a novel scheme to integrate…
Solidification of alloys in a thermal gradient usually involves the generation of flows by thermal or thermosolutal convection. We experimentally study their effects on the dynamics of a solidification interface by inducing a controlled…
Recent experiments on active materials, such as dense bacterial suspensions and microtubule-kinesin motor mixtures, show a promising potential for achieving self-sustained flows. However, to develop active microfluidics it is necessary to…
Recently, Kami\'nski et al. [1] demonstrated that a two-dimensional streamwise waviness with carefully selected amplitude and period can be effectively used in postponement of a flow separation at high Reynolds number which is out of reach…