Related papers: Effect of wall roughness on heat transfer in the s…
Mist/air two-phase flow is a promising cooling technique for many applications such as internal cooling of gas turbine blades. A significant enhancement of heat transfer can be achieved with a low mass fraction of droplets by utilizing the…
Triply Periodic Minimal Surface (TPMS) structures are attracting growing attention as promising geometries for next-generation high-performance heat exchangers (HXs), due to their continuous flow paths and high surface-area-to-volume ratio…
Turbulent concentric coaxial pipe flows are numerically investigated as canonical problem addressing spanwise curvature effects on heat and momentum transfer that are encountered in various engineering applications. It is demonstrated that…
A theoretical model is proposed to explain the roughness characteristics of an ice surface grown from a gravity and wind-driven supercooled water film flowing over an inclined plane. The effects of the water supply rate, plane slope and air…
This study compares turbulent channel flows over elastic walls with those over rough walls, to explore the role of the dynamic change of shape of the wall on turbulence. The comparison is made meaningful by generating rough walls from…
The influence of surface roughness on transition to turbulence in a Mach 4.5 boundary layer is studied using direct numerical simulations. Transition is initiated by the nonlinearly most dangerous inflow disturbance, which causes the…
Accurate modeling of ice accretion is important for safe and efficient design of aircraft and wind turbine systems. Heat transfer predictions obtained from fluid flow solvers are used as input in ice accretion codes. In glaze ice…
Direct Numerical Simulations of two superposed fluids in a channel with a textured surface on the lower wall have been carried out. A parametric study varying the viscosity ratio between the two fluids has been performed to mimic both {\bf…
This paper proposes a technique to identify individual pipe roughness parameters in a water distribution network by means of the inversion of the steady-state hydraulic network equations. By enabling the reconstruction of these hydraulic…
Surface effects become important in microfluidic setups because the surface to volume ratio becomes large. In such setups the surface roughness is not any longer small compared to the length scale of the system and the wetting properties of…
The wall cooling effect on the spectra and structures of thermodynamic variables are investigated in hypersonic turbulent boundary layers. The density and temperature can be divided into the acoustic and entropic modes based on the…
Direct numerical simulations of turbulent channels with rough walls are conducted in the transitionally rough regime. The effect that roughness produces on the overlying turbulence is studied using a modified triple decomposition of the…
This study explores the impact of wall slip on parameter estimation for integral-type non-linear viscoelastic models with time-strain separable memory functions, specifically examining high-density polyethylene (HDPE) and thermoplastic…
Direct numerical simulations have been performed for turbulent thermal convection between horizontal no-slip, permeable walls with a distance $H$ and a constant temperature difference $\Delta T$ at the Rayleigh number…
Direct numerical simulations (DNS) of particle-laden turbulent flow in straight, mildly curved and strongly bent pipes are performed in which the solid phase is modelled as small heavy spherical particles. A total of seven populations of…
We carry out direct numerical simulation (DNS) of flow in a turbulent square duct by focusing on heat transfer effects, considering the case of unit Prandtl number. Reynolds numbers up to $Re_\tau \approx 2000$ are considered which are much…
The shape of a microchannel cross-section is usually affected by a significant uncertainty due to the small hydraulic diameter. Such an uncertainty is indeed present at any scale, but is amplified in smaller scales, becoming significantly…
Boundary layer flow over a realistic porous wall might contain both the effects of wall-permeability and wall-roughness. These two effects are typically examined in the context of a rough-wall flow, i.e., by defining a ``roughness'' length…
Building upon our first paper [Hu, K.X, & Hu, Y. J. (2025). Hydroacoustic Absorption and Amplification by Turbulence, arXiv:2512.07920], the present work conducts a more in-depth investigation into the impact of turbulence on hydroacoustic…
This paper studies the effects of mixed convection fluid motion and heat transmission of Al2O3-Water nanofluid in a square enclosure including two heated obstacles, with temperature and nanoparticle concentration being determined by the…