Related papers: Effect of processing parameters on the properties …
Micro Porosity Sintered wick is made from metal injection molding processes, which provides a wick density with micro scale. It can keep more than 53 % working fluid inside the wick structure, and presents good pumping ability on working…
Droplet wicking and evaporation in porous nanochannels is experimentally studied on a heated surface at temperatures ranging from 35oC to 90oC. The fabricated geometry consists of cross-connected nanochannels of height 728 nm with…
Chemical looping water splitting systems operate at relatively high temperatures (450-800 degree C) to produce, purify, or store hydrogen by the cyclic reduction and oxidation (redox) of a solid oxygen carrier. Therefore, to improve…
Heat and mass transfer inside the porous wick of a capillary evaporator is studied using a mixed pore-network model. The impact of the thermal conductivity of the wick on the overheating limit (defined as the difference between the maximum…
We propose a new class of wicks, consisting of closely packed circular rods, whose evaporative capacities have been measured at different heat loads ranging between 0.05W/cm^2 and 8W/cm^2. The experiments were performed with two different…
The ever-increasing need for power consumption in electronic devices, coupled with the requirement for thinner size, calls for the development of efficient heat spreading components. Vapor chambers (VCs), because of their ability to…
We investigate the dynamics of spreading of a small liquid droplet in gas in a one-component simple fluid, where the temperature is inhomogeneous around 0.9Tc and latent heat is released or generated at the interface upon evaporation or…
Porosity is a key parameter on thermal barrier coatings, directly influencing thermal conductivity and strain tolerance. Suspension high velocity oxy-fuel (SHVOF) thermal spraying enables the use of sub-micron particles as feedstock,…
This study explores heat transfer mechanisms in heat pipes with sub-critical nanopores using coarse-grained molecular dynamics (CGMD) simulations, aiming to enhance thermal management in nanoscale applications. With the increasing need for…
Wicking is a widely studied process in both natural and artificial systems. In many industrial applications, such as heat pipes, the wicking liquid evaporates to regulate temperature effectively. This study focuses on a simpler scenario…
Sustainable liquid cooling solutions are recognized as the future of thermal management in the chip industry. Among them, the phase change heat transfer devices such as heat pipes and vapour chambers have shown tremendous potential. These…
Drying colloidal droplets have a wide range of applications from medical diagnostics to coatings for industries. This paper explores the effects of the substrate temperature (ranging from $25$ to $55 ^{\circ}$C) and various initial…
Viscosity is a fundamental property of liquids and determines the diffusivity of suspended particles. A gradient in viscosity leads to a gradient in diffusivity, yet it is unknown whether such a gradient can lead to directed transport of…
In microfluidic devices, droplets serving as carriers for chemical reactors or biomass can form stably encapsulated particles during the freezing process, holding significant importance in pharmaceuticals and microchemical reaction control.…
The thermal transport properties of porous silicon and nano-hybrid "porous silicon/water" systems are presented here. The thermal conductivity was evaluated with equilibrium molecular dynamics technique for porous systems made of spherical…
Capillary effects such as imbibition-drying cycles impact the mechanics of granular systems over time. A multiscale poromechanics framework was applied to cement paste, that is the most common building material, experiencing broad humidity…
The thermal conductivity study on the pyrochlore structured ceramics is important for utilization of these materials as an inert matrix fuel, electrolytes for oxide fuel cell and thermal barrier coating. The impact of porosity, structural…
An uncoupled multi-scale homogenization approach is used to estimate the effective thermal conductivities of plain weave C/C composites with a high degree of porosity. The geometrical complexity of the material system on individual scales…
In this paper, the inherent gradient flow structures of thermo-poro-visco-elastic processes in porous media are examined for the first time. In the first part, a modelling framework is introduced aiming for describing such processes as…
Drop-wise condensation (DWC) has been the focus of scientific research in vapor condensation technologies since the 20th century. Improvement of condensation rate in DWC is limited by the maximum droplet a condensation surface could…