Related papers: A novel polystyrene-based scintillator production …
Scintillators are widely used in radiation detection, with continuous advancements enhancing their performance and developing new materials. This study presents a custom experimental setup for the characterization of crystal scintillators…
In order to develop a high spatial resolution (micron level) thermal neutron detector, a detector assembly composed of cerium doped lithium glass microfibers, each with a diameter of 1\,$\mu$m, is proposed, where the neutron absorption…
Additive Layer Manufacturing (ALM), also broadly known as 3D printing, is a new technology to produce 3D objects. As an opposite approach to the conventional subtractive manufacturing process, 3D objects are created by adding thin material…
Particle accelerators represent some of the most sophisticated engineering achievements of our time. Their construction requires a unique combination of physics insight and mechanical engineering expertise. The aim of this paper is to…
Elements of experimental equipment for the production of biofuel components must meet high reliability and safety requirements. At the same time, in the course of research on the subject of creating equipment for the production of biofuels,…
Thin film detectors which incorporate semiconductor materials other than silicon have the potential to build upon their unique material properties and offer advantages such as faster response times, operation at room temperature, and…
The performance of the $200\times2.5\times1$ cm$^3$ plastic scintillator strip with wavelength shifting fiber read-out by two novel photodetectors called Silicon PhotoMultipliers (SiPMs) is discussed. The advantages of SiPM relative to the…
Additive manufacturing has revolutionized the building of materials direct from design, allowing high resolution rapid prototyping in complex 3D designs with many materials. 3D printing hasenabled high strength damage-tolerant structures,…
We developed a segmented reactor-antineutrino detector made of plastic scintillators for application as a tool in nuclear safeguards inspection and performed mostly unmanned field operations at a commercial power plant reactor. At a…
Additive manufacturing is a versatile technique that shows promise in providing quick and dynamic manufacturing for complex engineering problems. Research has been ongoing into the use of additive manufacturing for potential applications in…
Silicon photomultipliers (SiPMs) are a good alternative to photomultiplier tubes (PMTs) because their gain and quantum efficiency are comparable to PMTs. However, the largest single-chip SiPM is still less than 1~cm$^2$. In order to use…
In recent years, demand for scintillation detectors with high time resolution (better than 100 ps) has emerged in high-energy physics and medical imaging applications. In particular, time of flight positron emission tomography (TOF-PET) can…
In the industrial practice, additive manufacturing processes are often followed by post-processing operations such as subtractive machining, milling, etc. to achieve the desired surface quality and dimensional accuracy. Hence, a given part…
We report on the design, construction, and beam test of a pilot three-dimensional projection detector based on opaque water-based liquid scintillator (oWbLS). The detector consists of an $8 \times 8 \times 16$ cm$^3$ acrylic vessel…
Synthetic polymeric materials underpin fundamental technologies in the energy, electronics, consumer goods, and medical sectors, yet their development still suffers from prolonged design timelines. Although polymer informatics tools have…
A new type of neutron detector, named Stack Structure Solid organic Scintillator (S$^4$), consisting of multi-layer plastic scintillators with capability to suppress low-energy $\gamma$ rays under high-counting rate has been constructed and…
While stress visualization within 3-dimensional particles would greatly advance our understanding of the behaviors of complex particles, traditional photoelastic methods suffer from a lack of available technology for producing suitable…
Three-dimensional (3D) printing is a powerful development tool both in industry, as well as in biomedical research. Additive-lathe 3D printing is an emerging sub-class of 3D printing whereby material is layered outward from the surface of a…
An ultra thin silicon detector called U3DTHIN has been designed and built for neutral particle analyzers (NPA) and thermal neutron detection. The main purpose of this detector is to provide a state-of-the-art solution for detector system of…
Mass production of augmented reality (AR) waveguides has been challenging due to the intricate nature of the fabrication technique and the high precision required for its optical characteristics. In this paper, we have presented a novel and…