Related papers: Scannerless non-line-of-sight three dimensional im…
High speed, high-resolution, and accurate 3D scanning would open doors to many new applications in graphics, robotics, science, and medicine by enabling the accurate scanning of deformable objects during interactions. Past attempts to use…
Real time, high resolution 3D reconstruction of scenes hidden from the direct field of view is a challenging field of research with applications in real-life situations related e.g. to surveillance, self-driving cars and rescue missions.…
High-resolution three-dimensional imaging under photon-starved conditions remains challenging. Here, we demonstrate a high-resolution long-range 3D single-photon imaging system based on a digital micromirror device (DMD) and a compact 64…
Non-Line-of-Sight (NLOS) imaging aims at recovering the 3D geometry of objects that are hidden from the direct line of sight. In the past, this method has suffered from the weak available multibounce signal limiting scene size, capture…
Imaging across both the full transverse spatial and temporal dimensions of a scene with high precision in all three coordinates is key to applications ranging from LIDAR to fluorescence lifetime imaging. However, compromises that sacrifice,…
The ability to gain insights into the 3D properties of artificial or biological systems is often critical. However, 3D structures are difficult to retrieve at low dose and with extremely fast processing, as most techniques are based on…
Observing and studying the evolution of rare non-repetitive natural phenomena such as optical rogue waves or dynamic chemical processes in living cells is a crucial necessity for developing science and technologies relating to them. One…
Time-of-flight three dimensional imaging is an important tool for many applications, such as object recognition and remote sensing. Unlike conventional imaging approach using pixelated detector array, single-pixel imaging based on projected…
Recent development of lensless imagers has enabled three-dimensional (3D) imaging through a thin piece of optics in close proximity to a camera sensor. A general challenge of wide-field lensless imaging is the high computational complexity…
Non-line-of-sight (NLOS) imaging techniques use light that diffusely reflects off of visible surfaces (e.g., walls) to see around corners. One approach involves using pulsed lasers and ultrafast sensors to measure the travel time of…
We present a new method to acquire the 3D information from a SPAD-based direct-Time-of-Flight (d-ToF) imaging system which does not require the construction of a histogram of timestamps and can withstand high flux operation regime. The…
Mask-based lensless cameras offer a novel design for imaging systems by replacing the lens in a conventional camera with a layer of coded mask. Each pixel of the lensless camera encodes the information of the entire 3D scene. Existing…
In this paper we propose a low-cost high-speed imaging line scan system. We replace an expensive industrial line scan camera and illumination with a custom-built set-up of cheap off-the-shelf components, yielding a measurement system with…
Super-resolution ultrasound imaging has been so far achieved in 3-D by mechanically scanning a volume with a linear probe, by co-aligning multiple linear probes, by using multiplexed 3-D clinical ultrasound systems, or by using 3-D…
Lensless cameras provide a framework to build thin imaging systems by replacing the lens in a conventional camera with an amplitude or phase mask near the sensor. Existing methods for lensless imaging can recover the depth and intensity of…
Recently, there has been an increase in the demand of virtual 3D objects representing real-life objects. A plethora of methods and systems have already been proposed for the acquisition of the geometry of real-life objects ranging from…
Computational imaging modalities support a simplification of the active architectures required in an imaging system and these approaches have been validated across the electromagnetic spectrum. Recent implementations have utilized…
Accurate 3D imaging is essential for machines to map and interact with the physical world. While numerous 3D imaging technologies exist, each addressing niche applications with varying degrees of success, none have achieved the breadth of…
Emerging single-photon-sensitive sensors combined with advanced inverse methods to process picosecond-accurate time-stamped photon counts have given rise to unprecedented imaging capabilities. Rather than imaging photons that travel along…
Advances in 3D reconstruction using neural rendering have enabled high-quality 3D capture. However, they often fail when the input imagery is corrupted by motion blur, due to fast motion of the camera or the objects in the scene. This work…