Related papers: Light induced resistive switching in copper oxide …
Memristive devices have drawn considerable research attention due to their potential applications in non-volatile memory and neuromorphic computing. The combination of resistive switching devices with light-responsive materials is…
Lighting design in indoor environments is of primary importance for at least two reasons: 1) people should perceive an adequate light; 2) an effective lighting design means consistent energy saving. We present the Invisible Light Switch…
The paper demonstrates that negative refractive index can be achieved via tuning the tunneling rate between a double quantum dots(QDs) system by applying a bias voltage, and a pulsed laser. As the bias voltage being changed, the refraction…
Potentiostatic impedance spectroscopy (IS) is a well stablished characterization technique for elucidating the electric resistivity and capacitive features of materials and devices. In the case of solar cells, by applying a small voltage…
We report giant resistive switching of an order of 104, long-time charge retention characteristics up to 104 s, non-overlapping SET and RESET voltages, ohmic in low resistance state (LRS) and space charge limited current (SCLC) mechanism in…
In this paper, we consider informative potentialities of the "active" optical noise spectroscopy, under which we understand, generally, spectroscopy of response of a multilevel quantum system to the resonant optical field with its intensity…
We demonstrate that switching of ferroelectric thin-films sandwiched between metallic electrodes can be controlled by laser-assisted heating, reminiscent of heat-assisted magnetic recording. We employ electrical switching cycles that…
Frequency upconversion, which converts low-energy photons into higher-energy ones, typically requires intense coherent illumination to drive nonlinear processes or the use of externally driven optoelectronic devices. Here, we demonstrate an…
Reconfigurable intelligent surface (RIS) has been regarded as a promising technique due to its high array gain and low power. However, the traditional passive RIS suffers from the ``double fading'' effect, which has restricted the…
A Reflective Intelligent Surface (RIS) consists of many small reflective elements whose reflection properties can be adjusted to change the wireless propagation environment. Envisioned implementations require that each RIS element be…
Electric-field-induced resistance switching (RS) phenomena have been studied for over 60 years in metal/dielectrics/metal structures. In these experiments a wide range of dielectrics have been studied including binary transition metal…
Thin Cr films 28-nm thick deposited on glass substrates were processed by scanning low-intensity femtosecond laser pulses with energy well below single-pulse damage threshold. Two types of laser-induced periodic surface structures (LIPSS)…
We propose an infrared power switch based on an asymmetric high-Q microcavity incorporating a metallic nanolayer in close proximity to a layer made of a phase-change material (PCM). The microcavity is designed so that when the PCM layer is…
Intelligent reflecting surface (IRS) is envisioned to be a promising solution for designing spectral and energy efficient wireless systems. In this letter, we study a multi-IRS-assisted system under Rician fading where the phase shifts…
The electronic structure of CuIr$_2$S$_4$ has been investigated using various bulk-sensitive x-ray spectroscopic methods near the Ir $L_3$-edge: resonant inelastic x-ray scattering (RIXS), x-ray absorption spectroscopy in the partial…
Strongly correlated insulators, such as Mott or charge-transfer insulators, exhibit a strong temperature dependence in their resistivity. Consequently, self-heating effects can lead to electrothermal instabilities in planar thin film…
In traditional Reconfigurable Intelligent Surfaces (RIS) systems, the RIS is mounted on stationary structures like buildings, walls, or posts. They have shown promising results in enhancing the performance of wireless systems like capacity…
The current work proposes a novel scheme for developing a light-activated non-filamentary memristor device by fabricating an Au-nanoparticle embedded HfO$_2$-bilayer/p-Si MOS structure. Under illumination, the electrons in such embedded…
Nonvolatile resistive-switching (RS) memories promise to revolutionize hardware architectures with in-memory computing. Recently, ion-interclation materials have attracted increasing attention as potential RS materials for their…
Resistive switching is one of the key phenomena for applications such as nonvolatile memories or neuromorphic computing. V3O5, a compound of the vanadium oxide Magn\'eli series, is one of the rare materials to exhibit an insulator-metal…