Related papers: Transversal growth microstructures of quasicrystal…
The preparation in thin film form of the known icosahedral phase in Ti-Ni-Zr bulk alloys has been investigated as a function of substrate temperature. Films were deposited by Pulsed Laser Deposition on sapphire substrates at temperatures…
We have grown Au/Ag modulated nanostructured thin films by pulsed laser deposition using metallic targets. The growths performed at room temperature involved deposition of alternate layers of the two metals with larger thickness of Au and…
Nanocrystals of indium oxide (In$_2$O$_3$) with sizes below 10 nm were prepared in alumina matrixes by using a co-pulverization method. The used substrates such as borosilicate glasses or (100) silicon as well as the substrate temperatures…
In order to get homogeneous nanostructured Aluminum Nitride deposits, thin films were grown at room temperature on [001] Si substrates by radio frequency magnetron reactive sputtering. The deposits were analysed by Transmission Electron…
During the growth of metal thin films on dielectric substrates at a given deposition temperature T, the film's morphology is conditioned by the magnitude and asymmetry of up- and downhill diffusion. Any severe change of this mechanism leads…
Epitaxial films have the potential to be used as model systems for fundamental investigations on the martensitic transformation in binary NiTi. In this paper, we discuss growth of binary NiTi thin films on single crystalline MgO substrates.…
Ca- and Zn-subsituted Y1-xCaxBa2(Cu1-yZny)O7-delta (x = 0, 0.05 and y = 0, 0.02, 0.04, 0.05) thin films were grown on SrTiO3 (100) substrates using the pulsed laser deposition (PLD) technique. Effects of various growth parameters on the…
Dual-phase Zr-based thin films synthesized by magnetron co-sputtering and showing competitive growth between amorphous and crystalline phases have been reported recently. In such films, the amorphous phase grows as columns, while the…
Synthesis of rationally designed nanostructured materials with optimized mechanical properties, e.g., high strength with considerable ductility, requires rigorous control of diverse microstructural parameters including the mean size, size…
Monophasic and homogeneous Ni10Zr7 nanocrystalline alloy films were successfully grown at room temperature by co-sputtering in an indigenously developed three-gun DC/RF magnetron sputtering unit. The films could be produced with long-range…
Herein, we report CeIrIn5 thin-film growth on a MgF2 (001) substrate using pulsed laser deposition technique. X-ray diffraction analysis showed that the thin films were either mainly a-axis-oriented (TF1) or a combination of a- and…
The growth of high-quality superconducting thin film on silicon substrates is essential for quantum computing, and low signal interconnects with industrial compatibility. Recently, the growth of $\alpha$-Ta (alpha-phase tantalum) thin films…
Numerical Simulations are employed to create amorphous nano-films of a chosen thickness on a crystalline substrate which induces strain on the film. The films are grown by a vapor deposition technique which was recently developed to create…
Advanced nanodevices require high-precision machining of thin films using ultrafast lasers. However, thin-film fabrications cause variations in microstructure, crystallographic orientation, and residual stresses owing to coating conditions…
The investigation of devitrification in thermally annealed nanodimensional glassy alloy thin films provides a comprehensive understanding of their thermal stability, which can be used to explore potential applications. The amorphous to…
Thin films of polycrystalline $\beta$-Mn structure CoZn have been grown on thermally oxidized Si substrates by co-sputtering from elemental targets followed by annealing. A range of films grown with variable Co deposition power and fixed Zn…
Nickel carbon based multi-layers are a viable route towards future hard X-ray and soft $\gamma$-ray focusing telescopes. Here, we study the Pulsed Laser Deposition growth conditions of such bilayers by Reflective High Energy Electron…
Nanoporous thin-films are an important class of materials, offering a way to observe fundamental surface and bulk processes with particles larger than individual atoms, but small enough to interact significantly with each other through…
We report the successful fabrication of superconducting tantalum nitride (TaN) thin films using a pulsed laser deposition technique with 1064 nm radiation. Films with thickness $ \sim $ 100 nm deposited on MgO (100) single crystals and on…
The effects of substrate treatment, temperature and composition on the surface morphology of Ni-Cr thin films grown on MgO(001) are studied by scanning tunneling microscopy (STM) and atomic force microscopy (AFM). A combination of…