Related papers: Direct Numerical Simulation of a Turbulent Boundar…
A new slow growth formulation for DNS of wall-bounded turbulent flow is developed and demonstrated to enable extension of slow growth modeling concepts to complex boundary layer flows. As in previous slow growth approaches, the formulation…
The convection velocity ($U_C$) of turbulent structures has been studied in adverse-pressure-gradient (APG) turbulent boundary layers (TBLs) for a wide range of Reynolds numbers $Re_\tau = 1400 - 4000$. The study is based on estimation of…
We present the results of a Direct Numerical Simulation of a particle-laden spatially developing turbulent boundary layer up to Re{\theta} = 2500. Two main features differentiate the behavior of inertial particles in a zero-…
The flow within an oscillatory boundary layer, which approximates the flow generated by propagating sea waves of small amplitude close to the bottom, is simulated numerically by integrating Navier-Stokes and continuity equations. The bottom…
We present direct numerical simulations (DNS) of laminar to turbulent transition in Herschel-Bulkley (HB) yield-stress fluids flowing through pipes and rectangular channels. The simulations employ a Herschel-Bulkley formulation that…
Knowledge of turbulent flows over non-flat surfaces is of major practical interest in diverse applications. Significant work continues to be reported in the roughness regime at high Reynolds numbers where the cumulative effect of surface…
Well-resolved direct numerical simulations (DNSs) have been performed of the flow in a smooth circular pipe of radius $R$ and axial length $10\pi R$ at friction Reynolds numbers up to $Re_\tau=5200$. Various turbulence statistics are…
A three-dimensional (3D) direct numerical simulation is combined with a laboratory study to describe the turbulent flow in an enclosed annular rotor-stator cavity characterized by a large aspect ratio G=(b-a)/h=18.32 and a small radius…
We perform point-particle direct numerical simulations (PP-DNS) of particle-laden flow through a linear compressor cascade subjected to synthetic freestream turbulence. Monodisperse particles are advanced in a one-way coupled…
Pore-resolved direct numerical simulations (DNS) are performed to investigate the interactions between streamflow turbulence and groundwater flow through a randomly packed porous sediment bed for three permeability Reynolds numbers, $Re_K$,…
Direct numerical simulations are performed to investigate the combined effects of surface roughness and wall heat transfer on spatially developing compressible turbulent boundary layers at $Ma=2.5$. The roughness consists of transverse…
Turbulent heat and freshwater transport at ice-ocean interfaces controls glacier and iceberg melt rates, yet the underlying physics remains poorly constrained. Parameterizations that assume shear boundary layer scaling are commonly used,…
This paper reports turbulent boundary layer measurements made over open-cell reticulated foams with varying pore size and thickness, but constant porosity ($\epsilon \approx 0.97$). The foams were flush-mounted into a cutout on a flat…
A Direct Numerical Simulation (DNS) of the incompressible flow around a rectangular cylinder with chord-to-thickness ratio 5:1 (also known as the BARC benchmark) is presented. The work replicates the first DNS of this kind recently…
The spatial characteristics and structure of an axisymmetric turbulent boundary layer under strong adverse pressure gradient and weak transverse curvature are investigated using incompressible large-eddy simulation. The boundary layer is on…
An investigation of turbulent boundary layers (TBLs) is presented for a NACA0012 airfoil at angles of attack 9 and 12 deg. Wall-resolved large eddy simulations (LES) are conducted for a freestream Mach number M = 0.2 and chord-based…
We present direct numerical simulations (DNSs) of bypass transition over a flat plate with inlet freestream turbulence intensity levels of 0.75%, 1.5%, 2.25%, 3.0%, and 6.0%, respectively. A new definition of the transition intermittency is…
The energy gradient method is used to analyze the turbulent generation in the transition boundary layer flow. It is found that the maximum of the energy gradient function occurs at the wall for the Blasius boundary layer flow. At this…
Turbulent boundary layers exhibit a universal structure which nevertheless is rather complex, being composed of a viscous sub-layer, a buffer zone, and a turbulent log-law region. In this letter we present a simple analytic model of…
Modelling the near-wall region of wall-bounded turbulent flows is a widespread practice to reduce the computational cost of large-eddy simulations (LESs) at high Reynolds number. As a first step towards a data-driven wall-model, a…