Related papers: Progressive InSAR phase estimation
Nowadays, interferometric synthetic aperture radar (InSAR) has been a powerful tool in remote sensing by enhancing the information acquisition. During the InSAR processing, phase denoising of interferogram is a mandatory step for topography…
Interferometric Synthetic Aperture Radar (InSAR) Imaging methods are usually based on algorithms of match-filtering type, without considering the scene's characteristic, which causes limited imaging quality. Besides, post-processing steps…
Incoherent processing for synthetic aperture radar (SAR) is a promising approach that enables low implementation costs, simplified hardware designs and operations in high frequency spectrum compared to the conventional imaging methods using…
Over the past decade, Interferometric Synthetic Aperture Radar (InSAR) has become a successful remote sensing technique. However, during the acquisition step, microwave reflections received at satellite are usually disturbed by strong…
Radar is a low-cost and ubiquitous automotive sensor, but is limited by array resolution and sensitivity when performing direction of arrival analysis. Synthetic Aperture Radar (SAR) is a class of techniques to improve azimuth resolution…
The radar interferometric absolute phase is essential for estimating topography and displacements. However, its conventional definition based on the range difference is idealized in that it cannot be applied to complex, dynamic targets.…
Phase unwrapping is a key problem in many coherent imaging systems, such as synthetic aperture radar (SAR) interferometry. A general formulation for redundant integration of finite differences for phase unwrapping (Costantini et al., 2010)…
Phase unwrapping remains a critical and challenging problem in InSAR processing, particularly in scenarios involving complex deformation patterns. In earthquake-related deformation, shallow sources can generate surface-breaking faults and…
Passive radar has key advantages over its active counterpart in terms of cost and stealth. In this paper, we address passive radar imaging problem by interferometric inversion using a spectral estimation method with a priori information…
In order to meet the theoretically achievable imaging performance, calibration of modern radio interferometers is a mandatory challenge, especially at low frequencies. In this perspective, we propose a novel parallel iterative…
Phase filtering and pixel quality (coherence) estimation is critical in producing Digital Elevation Models (DEMs) from Interferometric Synthetic Aperture Radar (InSAR) images, as it removes spatial inconsistencies (residues) and immensely…
In many areas of imaging science, it is difficult to measure the phase of linear measurements. As such, one often wishes to reconstruct a signal from intensity measurements, that is, perform phase retrieval. In this paper, we provide a…
A polarimetric synthetic aperture radar (PolSAR) system, which uses multiple images acquired with different polarizations in both transmission and reception, has the potential to improve the description and interpretation of the observed…
Target detection is the front-end stage in any automatic target recognition system for synthetic aperture radar (SAR) imagery (SAR-ATR). The efficacy of the detector directly impacts the succeeding stages in the SAR-ATR processing chain.…
Synthetic aperture radar (SAR) interferometry (InSAR) is performed using repeat-pass geometry. InSAR technique is used to estimate the topographic reconstruction of the earth surface. The main problem of the range-Doppler focusing technique…
Operational near-real-time monitoring of Earth's surface deformation using Interferometric Synthetic Aperture Radar (InSAR) requires processing algorithms that efficiently incorporate new acquisitions without reprocessing historical…
To avoid decorrelation, conventional synthetic aperture radar interferometry (InSAR) requires that interferometric images should have a common spectral band and the same resolution after proper preprocessing. For a high-resolution (HR)…
Monitoring of ground movement close to the rail corridor, such as that associated with landslips caused by ground subsidence and/or uplift, is of great interest for the detection and prevention of possible railway faults. Interferometric…
This paper presents parallel-in-time state estimation methods for systems with Slow-Rate inTegrated Measurements (SRTM). Integrated measurements are common in various applications, and they appear in analysis of data resulting from…
Interferometric Synthetic Aperture Radar (InSAR) imagery based on microwaves reflected off ground targets is becoming increasingly important in remote sensing for ground movement estimation. However, the reflections are contaminated by…