Related papers: Laser-processing of grinded and mechanically abrad…
Electropolishing is the premier surface preparation method for high-Q, high-gradient superconducting RF cavities made of Nb. This leaves behind an apparently smooth surface, yet the achievable peak magnetic fields fall well below the…
We use ab-initio electromagnetic simulations to investigate light absorption by rough surfaces in the context of the formation of laser-induced periodic surface structures. Our approach involves modeling a realistic rough surface using a…
Laser nitriding represents a versatile approach for tailoring the surface properties of metals. Up to now, its effect on the superconducting response of niobium nitrides remains largely unexplored. In this work, the nitriding process of…
During laser micro-polishing, the constant control of laser energy density is a key technology to improve the surface roughness. In this paper, a method which controls the energy density of UV(ultraviolet) pulse laser in real time with the…
Laser processing of graphene is of great interest for cutting, patterning and structural engineering purposes. Tunable nanosecond lasers have the advantage of being relatively widespread (compared to e.g. femtosecond or high-power…
A new surface treatment technique for niobium (Nb) Superconducting Radio Frequency (SRF) cavities called Buffered Electropolishing (BEP) has been developed at JLab. It was found that BEP could produce the smoothest surface finish on Nb…
We present measurements of hard x-rays in the 50-300 keV range from copper plasmas produced by 100 fs, 806 nm laser pulses at a peak intensity ~ 1016 W cm-2. Surface roughness, even at the tens of nanometer level, is shown to influence the…
The employment of ultrashort laser sources at the mid-IR spectral region for transparent materials is designed to open new routes for laser patterning and a wealth of exciting applications in optics and photonics. To elucidate the material…
A rapid and efficient photo-bleaching process was demonstrated with a high-energy nanosecond pulse to recover existing and/or revealed color centers on 10 kGy Gamma-irradiated Yb-doped optical fiber. Multi-mJ pulsed laser based on an…
The performance of superconducting radio-frequency (SRF) cavities made of Niobium is tied to the quality of their inner surfaces exposed to the radio frequency (RF) waves. Future superconducting particle accelerators, because of their…
The employment of femtosecond pulsed lasers has received significant attention due to its capability to facilitate fabrication of precise patterns at the micro- and nano- lengths scales. A key issue for efficient material processing is the…
Laser treatment has emerged into a cornerstone of industrial manufacturing. This creates the demand to understand in detail the involved physical processes and their dynamics, to control the process, and to keep guard in-situ the laser…
Industrial use of ultrashort-pulse surface structuring would significantly increase by an effective utilization of the average laser powers available currently. However, the unexplained degradation of surfaces processed with numerous pulses…
Simple high-performance two-stage hybrid technique was developed for fabrication of different plasmonic nanostructures, including nanorods, nanorings, as well as more complex structures on glass substrates. In this technique a thin noble…
In the present paper, the analysis of polishing, grinding and sand-blasting processes on oxidation behavior of nickel, copper and nickel-copper alloy has been investigated. Surface roughness has been measured using two methods: by contact…
We demonstrate a 13-fold increase in hard x-ray bremsstrahlung (10 - 200 keV) emitted by a copper plasma created by 100 fs, 806 nm pulses at $10^{14}-10^{15}$ Wcm$^{-2}$. This enhancement is achieved by roughening the target surface with…
Laser-cleaning of the electrodes in a planar micro-fabricated ion trap has been attempted using ns pulses from a tripled Nd:YAG laser at 355nm. The effect of the laser pulses at several energy density levels has been tested by measuring the…
The surface morphology of metal influences its optical absorptivity. Recent experiments have demonstrated that the femtosecond laser induced surface structures on metals could be dynamically controlled by the fluence of laser and the number…
In the present work the effect of surface roughness on oxidation behavior during the early stages of high temperature exposure of Ni-base superalloy IN 625 is described. The surface roughness was described using standard contact…
The accurate calculation of laser energy absorption during femto- or picosecond laser pulse experiments is very important for the description of the formation of periodic surface structures. On a rough material surface, a crack or a step…