Related papers: Mode II fracture of an MMA adhesive layer: theory …
Cohesive zone models do not consider the lateral contraction of adhesive layers under tensile loads. The constraint of the lateral contraction by the adherents which depends on the geometry of the adhesive layer has a major influence on the…
In this work, the mode I fracture toughness of dissimilar metal-composite adhesive joints is experimentally investigated using the double cantilever beam (DCB) test. The particular joint under study is resulted by the adhesive joining of a…
The shear strength of a pre-cracked sandwich layer is predicted, assuming that the layer is linear elastic or elastic-plastic, with yielding characterized by either J2 plasticity theory or by a strip-yield model. The substrates are elastic…
With the aim of understanding failure modes in the peeling of silicone-based adhesive joints and, in particular, the occurrence of adhesive or cohesive failure, an experimental campaign has been conducted by considering plastic substrates…
We formulate a multiscale model of adhesive layers undergoing impurity-dependent cohesive fracture. The model contemplates three scales: i) at the atomic scale, fracture is controlled by interatomic separation and the thermodynamics of…
An assessment is made of the J-integral test procedure for initial crack growth in an open-cell aluminium alloy foam by combining finite element (FE) simulations with experiment. It is found experimentally that a zone of randomly failed…
Mathematical models and computer algorithms are developed to calculate dynamic stress concentration and fracture wave propagation in a reinforced composite sheet. The composite consists of a regular system alternating extensible fibers and…
The accurate measurement of fracture resistance in elastomers is essential for predicting the mechanical limits of soft devices. Usually, this is achieved by performing tearing or peeling experiments on thin-sheet samples. Here, we show…
Experimental investigations on the effect of thicknesses on mixed-mode I/II fracture are performed with an aluminum alloy with thicknesses of 2, 4, 8 and 14 mm. It is found that under pure-mode I loading condition, the loading capacity per…
A new discrete cohesive zone model (DCZM) is presented for modeling the interface behavior of adhesive-bonded thin laminates and sandwich panels. The proposed model treats the interface as a spring element and the adherent as a beam…
We present a gradient-based theoretical framework for predicting hydrogen assisted fracture in elastic-plastic solids. The novelty of the model lies in the combination of: (i) stress-assisted diffusion of solute species, (ii) strain…
We study the relation between a threshold-force based model at the microscopic scale and mode I fracture at the macroscopic scale in a system of discrete interacting springs. Specifically, we idealize the contact between two surfaces as…
This study sequentially investigates the enhancement of fracture behavior in adhesive joints. Initially, mechanical sanding techniques were explored, revealing significant improvements of 55% in fracture energy and 38% in load-bearing…
Accurate prediction of fracture toughness under complex loading conditions, like mixed mode I/II, is essential for reliable failure assessment. This paper aims to develop a machine learning framework for predicting fracture toughness and…
High-strain-rate shear tests were conducted on a three-layered bonded test piece comprising a central aluminum layer with PMMA resin layers bonded on both sides. Upon calculating the displacement field and the strain field using digital…
A mix-mode cohesive fracture model considering tension, compression and shear material behaviour is presented, which has wide applications to geotechnical problems. The model considers both elastic and inelastic displacements. Inelastic…
We investigate the role of microstructural bridging on the fracture toughness of composite materials. To achieve this, a new computational framework is presented that integrates phase field fracture and cohesive zone models to simulate…
Impacted with sufficiently large stress, a dense, initially liquid-like suspension can be forced into a solid-like state through the process of shear jamming. While the onset of shear jamming has been investigated extensively, less is known…
The problem of a crack impinging on an interface has been thoroughly investigated in the last three decades due to its important role in the mechanics and physics of solids. In this investigation, this problem is revisited in view of the…
We investigate the influence of microstructural traps in hydrogen-assisted fatigue crack growth. To this end, a new formulation combining multi-trap stress-assisted diffusion, mechanism-based strain gradient plasticity and a hydrogen- and…