Related papers: Data-driven RANS closures for wind turbine wakes u…
Data from experiments and direct simulations of turbulence have historically been used to calibrate simple engineering models such as those based on the Reynolds-averaged Navier--Stokes (RANS) equations. In the past few years, with the…
While direct numerical simulations (DNS) are the most accurate method for studying turbulence, their large computational cost restricts their use to idealized configurations and to Reynolds numbers well below those found in practical…
Natural ventilation is gaining popularity in response to an increasing demand for a sustainable and healthy built environment, but the design of a naturally ventilated building can be challenging due to the inherent variability in the…
Wind turbines operating in the atmospheric boundary layer are constantly exposed to time-varying flow conditions. These disturbances often occur on similar time scales to wind-turbine controllers, which may interfere with wind-farm control…
This work presents a combined feedforward-feedback wake redirection framework for wind farm control. The FLORIS wake model, a control-oriented steady-state wake model is used to calculate optimal yaw angles for a given wind farm layout and…
A closure model is presented for large-eddy simulation (LES) based on the three-dimensional variational data assimilation algorithm. The approach aims at reconstructing high-fidelity kinetic energy spectra in coarse numerical simulations by…
Wall-bounded turbulence is relevant for many engineering and natural science applications, yet there are still aspects of its underlying physics that are not fully understood, particularly at high Reynolds numbers. In this study, we…
In the present paper, an aerodynamic investigation of a high-speed train is performed. In the first section of this article, a generic high-speed train against a turbulent flow is simulated, numerically. The Reynolds-Averaged Navier-Stokes…
Reliably predictive simulation of complex flows requires a level of model sophistication and robustness exceeding the capabilities of current Reynolds-averaged Navier-Stokes (RANS) models. The necessary capability can often be provided by…
In typical nature and engineering scenarios, such as supernova explosion and inertial confinement fusion, mixing flows induced by hydrodynamics interfacial instabilities are essentially compressible. Despite their significance, accurate…
In this study, we present an improved formulation for the wake-added turbulence to enhance the accuracy of intra-farm and farm-to-farm wake modeling through analytical frameworks. Our goal is to address the tendency of a commonly used…
A novel variant of Improved Delayed Detached-Eddy Simulation based on a differential Reynolds-stress background model is presented. The approach aims to combine the advantages of anisotropy-resolving Reynolds-stress closures in the modelled…
Symbolic regression (SR) methods have been extensively investigated to explore explicit algebraic Reynolds stress models (EARSM) for turbulence closure of Reynolds-averaged Navier-Stokes (RANS) equations. The deduced EARSM can be readily…
The present study represents a data-driven turbulent model with Galilean invariance preservation based on machine learning algorithm. The fully connected neural network (FCNN) and tensor basis neural network (TBNN) [Ling et al. (2016)] are…
Symmetries are fundamental to both turbulence and differential equations. The large-eddy simulation (LES) equations inherit these symmetries provided the LES closure respects them. Classical LES closures based on eddy viscosity or scale…
To bridge the gap between high and low fidelity numerical modeling tools for vertical-axis (or cross-flow) turbines (VATs or CFTs), an actuator line model (ALM) was developed and validated for both a high and a medium solidity vertical-axis…
Data-driven approaches offer novel opportunities for improving the performance of turbulent flow simulations, which are critical to wide-ranging applications from wind farms and aerodynamic designs to weather and climate forecasting. While…
Reynolds-Averaged Navier-Stokes (RANS) models are widely used for turbulent flow simulations due to their computational efficiency, but their accuracy strongly depends on the selected turbulence closure and may vary across the flow domain.…
We introduce a gradient-free data-driven framework for optimizing the power output of a wind farm based on a Bayesian approach and large-eddy simulations. In contrast with conventional wind farm layout optimization strategies, which make…
Climate change necessitates rapid expansion of renewable energy, with wind energy offering a scalable and low-impact solution. However, accurate prediction of wind loads and power generation remains challenging due to uncertainties in wind…