Related papers: Torsion instability of soft solid cylinders

The Plateau-Rayleigh instability shows that a cylindrical fluid flow can be destabilized by surface tension. Similarly, capillary forces can make an elastic cylinder unstable when the elastocapillary length is comparable to the cylinder's…

We consider the elastic deformation of a circular cylindrical sector composed of an incompressible isotropic soft solid when it is straightened into a rectangular block. In this process, the circumferential line elements on the original…

When a soft elastic cylinder is bent beyond a critical radius of curvature, a sharp fold in the form of a kink appears at its inner side while the outer side remains smooth. The critical radius increases linearly with the diameter of the…

Soft adhesive contacts are ubiquitous in nature and are increasingly used in synthetic systems, such as flexible electronics and soft robots, due to their advantages over traditional joining techniques. While methods to study the failure of…

We study what is clearly one of the most common modes of deformation found in nature, science and engineering, namely the large elastic bending of curved structures, as well as its inverse, unbending, which can be brought beyond complete…

We analyze stability of a thin inextensible elastic rod which has non-vanishing spontaneous generalized torsions in its stress-free state. Two classical problems are studied, both involving spontaneously twisted rods: a rectilinear beam…

Surface stress, which is always neglected in classical elastic theories, has recently emerged as a key role in the mechanics of highly deformable soft solids. In this paper, the effect of surface stress on the deformation and instability of…

We investigate the stability of the deformation modeled by the opening angle method, often used to give a measure of residual stresses in arteries and other biological soft tubular structures. Specifically, we study the influence of…

We study the Plateau-Rayleigh instability of a viscoelastic soft solid layer coated on a rigid cylinder i.e., a soft fibre with a rigid core. The onset of instability is examined using a linear stability analysis. We find that increasing…

Instability patterns of rolling up a sleeve appear more intricate than the ones of walking over a rug on floor, both characterized as uniaxially compressed soft-film/stiff-substrate systems. This can be explained by curvature effects. To…

We report a surface instability observed during the extrusion of extremely soft elastic solids in confined geometries. Due to their unique rheological properties, these soft solids can migrate through narrow gaps by continuously everting…

Instabilities in thin elastic sheets, such as wrinkles, are of broad interest both from a fundamental viewpoint and also because of their potential for engineering applications. Nematic liquid crystal elastomers offer a new form of control…

A submerged finite cylinder moving under its own weight along a soft incline lifts off and slides at a steady velocity while also spinning. Here, we experimentally quantify the steady spinning of the cylinder and show theoretically that it…

We evaluate the loss of stability of axially compressed slender and thick-walled tubes subject to a residual stress distribution. The nonlinear theory of elasticity, when used to analyze the underlying deformation, shows that the residual…

This work investigates the morphological stability of a soft body composed of two heavy elastic layers, attached to a rigid surface and subjected only to the bulk gravity force. Using theoretical and computational tools, we characterize the…

We investigate the finite bending and the associated bending instability of an incompressible dielectric slab subject to a combination of applied voltage and axial compression, using nonlinear electro-elasticity theory and its incremental…

A cylindrical elastomer tube can stay in an everted state without any applied external forces. If the thickness of the tube is small, the everted tube, except for the regions close to the two ends of the tube, is cylindrical, if the…

Lubricated sliding contact between soft solids is an interesting topic in biomechanics and for the design of small-scale engineering devices. As a model of this mechanical set-up, two elastic nonlinear solids are considered jointed through…

It is known that an object translating parallel to a soft wall in a viscous fluid produces hydro- dynamic stresses that deform the wall, which, in turn, results in a lift force on the object. Recent experiments with cylinders sliding under…

Within the context of finite deformation elasticity theory the problem of deforming an open sector of a thick-walled circular cylindrical tube into a complete circular cylindrical tube is analyzed. The analysis provides a means of…