Related papers: Solid-state Li-ion batteries operating at room tem…
The argyrodite sulfides are getting more and more attractive as highly promising solid-state electrolytes (SSEs) for high-performance all-solid-state batteries (ASSBs), owing to their high ionic conductivity, adequate plasticity, and decent…
The properties of the mixed system LiBH4 LiCl P2S5 are studied with respect to all-solid-state batteries. The studied material undergoes an amorphization upon heating above 601C, accompanied with increased Li+ conductivity beneficial for…
The solid-state electrolyte is critical for achieving next-generation high energy density and high-safety batteries. Solid polymer electrolytes (SPEs) possess great potential for commercial application owing to their compatibility with the…
Lithium-metal batteries employing concentrated glyme-based electrolytes and different cathode chemistries are herein evaluated in view of a safe use of the highly energetic alkali-metal anode. Indeed, diethylene-glycol dimethyl-ether…
The development of silicon anodes to replace conventional graphite in efforts to increase energy densities of lithium-ion batteries has been largely impeded by poor interfacial stability against liquid electrolytes. Here, stable operation…
A Li-conversion alpha-Fe2O3@C nanocomposite anode and a high-voltage LiNi0.5Mn1.5O4 cathode are synthesized in parallel, characterized, and combined in a Li-ion battery. alpha-Fe2O3@C is prepared via annealing of maghemite iron oxide and…
Solid-state batteries (SSBs) can offer a paradigm shift in battery safety and energy density. Yet, the promise hinges on the ability to integrate high-performance electrodes with state-of-the-art solid electrolytes. For example, lithium…
A full lithium-ion-sulfur cell with a remarkable cycle life was achieved by combining an environmentally sustainable biomass-derived sulfur-carbon cathode and a pre-lithiated silicon oxide anode. X-ray diffraction, Raman spectroscopy,…
All-solid-state lithium batteries (ASSLB) have been regarded as the most promising candidate to achieve the next generation energy storage with high energy and high safety. However, some bottlenecks, including high interfacial resistance,…
A safe lithium-sulfur (Li-S) battery employs a composite polymer electrolyte based on a poly(ethylene glycol) dimethyl ether (PEGDME) solid at room temperature. The electrolyte membrane enables a stable and reversible Li-S electrochemical…
All-solid-state batteries are expected to enable batteries with high energy density with the use of lithium metal anodes. Although solid electrolytes are believed to be mechanically strong enough to prevent lithium dendrites from…
Use of electrode materials that show phase change behavior and hence drastic changes in electrochemical activity during operation, have not been explored for Li-ion batteries. Here we demonstrate the vanadium oxide (VO2) cathode that…
Composite materials achieved by including transition-metal oxides with different structures and morphologies in sulfur are suggested as scalable cathodes for high-energy lithium-sulfur (Li-S) batteries. The composites contain 80 wt.% sulfur…
Spinel-type LiNi0.5Mn1.5O4 (LNMO) is one of the most promising 5 V-class cathode materials for Li-ion batteries that can achieve high energy density and low production costs. However, in liquid electrolyte cells, the high voltage causes…
Thin film solid state lithium-based batteries (TSSBs) are increasingly attractive for their intrinsic safety due to the use of a nonflammable solid electrolyte, cycling stability, and ability to be easily patterned in small form factors.…
Lithium-air batteries have been considered as ultimate solutions for the power source of long-range electrified transportation, but state-of-the-art prototypes still suffer from short cycle life, low efficiency and poor power output. Here,…
Lithium metal batteries (LMBs), when coupled with a localized high-concentration electrolyte and a high-voltage nickel-rich cathode, offer a solution to the increasing demand for high energy density and long cycle life. However, the…
Na-ion batteries (NIBs), which are recognized as a next-generation alternative technology for energy storage, still suffer from commercialization constraints due to the lack of low-cost, high-performance cathode materials. Since our first…
We have demonstrated a fiber lithium ion battery (LIB) fabricated by co-twisting a LiFePO4 composite-coated copper wire (cathode) together with an aluminum wire (anode). An all-solid LiPF6 composite layer functioning both as the electrolyte…
All-solid-state Li-ion batteries promise safer electrochemical energy storage with larger volumetric and gravimetric energy densities. A major concern is the limited electrochemical stability of solid electrolytes and related detrimental…