Related papers: Parallel multifocus optical-resolution photoacoust…
Photoacoustic Remote Sensing (PARS) microscopy is an emerging label-free optical absorption imaging modality. PARS operates by capturing nanosecond-scale optical perturbations generated by photoacoustic pressures. These time-domain (TD)…
Synchronously pumped optical parametric oscillators (OPOs) provide uniquely versatile platforms to generate ultrafast mid-infrared pulses within a spectral range beyond the access of conventional mode-locked lasers. However, conventional…
We describe a fiber Raman amplifier for nanosecond and sub-nanosecond pulses centered around 1260 nm. The amplification takes place inside a 4.5-m-long polarization-maintaining phosphorus-doped fiber, pumped at 1080 nm by 3-ns-long pulses…
Optical fibers have long been employed as sensors in a wide range of commercial systems. Distributed Acoustic Sensing (DAS) extends this concept by enabling the detection and localization of acoustic sources along the fiber, using…
In Photoacoustic imaging, Delay-and-Sum (DAS) algorithm is the most commonly used beamformer. However, it leads to a low resolution and high level of sidelobes. Delay-Multiply-and-Sum (DMAS) was introduced to provide lower sidelobes…
We introduce pulsed correlation time-of-flight (PC-ToF) sensing, a new operation mode for correlation time-of-flight range sensors that combines a sub-nanosecond laser pulse source with a rectangular demodulation at the sensor side. In…
Two techniques that employ equally spaced trains of optical pulses to map an optical high frequency into a low frequency modulation of the signal that can be detected in real time are compared. The development of phase-stable optical…
In-air acoustic imaging systems demand beamforming techniques that offer a high dynamic range and spatial resolution while also remaining robust. Conventional Delay-and-Sum (DAS) beamforming fails to meet these quality demands due to high…
This work summarizes the design, construction, initial performance evaluation and pilot clinical results of the IMAS system, a long axial field of view (FOV), also known as total-body (TB-), positron emission tomography (PET) prototype…
Tunable narrowband spectral filters with high light throughput and wide dynamic range have remarkable applications such as in optical communications, optical spectroscopy and spectral imaging. However, a cost is usually associated with the…
Coherent acoustic phonons, whose damping sets the upper bound of quality factors in acoustic resonators, play a critical role in advanced telecommunication and quantum information technologies. Yet, probing their decay in the GHz regime…
In this article, we present a deflection measurement setup for Atomic Force Microscopy (AFM). It is based on a quadrature phase differential interferometer: we measure the optical path difference between a laser beam reflecting above the…
We propose and experimentally demonstrate a scheme to generate optically-controlled delays based on off-resonant Raman absorption. Dispersion in a transparency window between two neighboring, optically-activated Raman absorption lines is…
We present a novel fiber-optic component, a "tapered multi-core fiber (MCF)", designed for integration into ultra-miniaturized endoscopes for minimally invasive two-photon point-scanning imaging and to address the power delivery issue that…
We realize a flat lens with graded negative refractive index by a two-dimensional phononic crystal. The index-grade is achieved by gradual modification of the filling fraction along the transverse direction to propagation. We demonstrate…
The resolution of far-field optical microscopes, which rely on propagating optical modes, is widely believed to be limited because of diffraction to a value on the order of a half-wavelength $\lambda /2$ of the light used. Although…
Depth cameras are emerging as a cornerstone modality with diverse applications that directly or indirectly rely on measured depth, including personal devices, robotics, and self-driving vehicles. Although time-of-flight (ToF) methods have…
State-of-the-art time-of-flight (ToF) based 3D sensors suffer from poor lateral and depth resolutions. In this work, we introduce a novel sensor concept that provides ToF-based 3D measurements of real world objects with depth precisions up…
3D imaging is increasingly impacting areas such as space, defense, automation, medical and automotive industries. The most well-known optical 3D imaging systems are LIDAR systems that rely on Time of Flight (ToF) measurement. The depth…
Recently, the multilevel diffractive lenses (MDLs) have attracted considerable attention mainly due to their superior wave focusing performance; however, efforts to correct the chromatic aberration are still in progress. Here, we…