Related papers: Heat-capacity measurements under uniaxial pressure…
We report on the realization of a capacitive dilatometer, designed for high-resolution measurements of length changes of a material for temperatures 1.4 K $\leq T \leq$ 300 K and hydrostatic pressure $P \leq$ 250 MPa. Helium ($^4$He) is…
A device to measure viscosity of dielectric oils was developed. The device is an inset to an autoclave system where the temperature and the pressure could be controlled. The device is capable of measuring viscosities up to 400C and 5000psi,…
Response to uniaxial stress has become a major probe of electronic materials. Tuneable uniaxial stress may be applied using piezoelectric actuators, and so far two methods have been developed to couple samples to actuators. In one,…
A modified AC method based on micro-fabricated heater and resistive thermometers has been applied to measure the thermopower of microscale samples. A sinusoidal current with frequency {\omega} is passed to the heater to generate an…
A specific heat measuring instrument, with the capacity for the application of magnetic fields up to 9 Tesla, resorting to microcalorimetry chips from the company Xensor Integration, has been successfully assembled and its functioning…
A new set-up to measure acoustic wave velocities through deforming rock samples at high pressures (up to 1000 MPa), temperatures (up to 700$^\circ$C) and differential stress (up to 1500 MPa) has been developed in a recently refurbished gas…
The photoacoustic method with piezoelectric detection for the simultaneous evaluation of the thermophysical properties is proposed. The approach is based on the settling of an additional heat sink for redistribution of heat fluxes deposited…
A high resolution non-adiabatic method for measuring the heat capacity ($C_v$) of bulk samples of condensable gases in the range 7.5-70 K is described. In this method $C_v$ is evaluated by directly comparing the heating and cooling rates of…
We have developed a new heat-capacity measuring system with ZYX graphite that is known to have much better crystallinity than Grafoil and started data collection. We report preliminary data as well as a detailed description of…
We report simultaneous hydrostatic pressure studies on the critical temperature $T_c$ and on the pseudogap temperature $T^*$ performed through resistivity measurements on an optimally doped high-$T_c$ oxide…
We have developed a calorimeter able to give a qualitative picture of the specific heat of a sample under high pressure up to approximately 10 GPa. The principle of ac-calorimetry was adapted to the conditions in a high pressure clamp. The…
We report a new design of temperature-modulated dilatometer, which obtains the linear thermal expansion coefficient by measuring the oscillating changes of the sample's length and temperature by a piezobender and a thermocouple,…
A spinning gas, heated adiabatically through axial compression, is known to exhibit a rotation-dependent heat capacity. However, as equilibrium is approached, a new effect is identified here wherein the temperature does not grow…
We present the design, implementation, and validation of a cryo-compatible strain cell for elastoresistance measurements in quantum materials. The cell is actuated by three large-format piezoelectric stacks and enables both compressive and…
The current performances of single-board microcontrollers render them attractive not only for basic applications but also for more elaborate projects, amongst which physics teaching or research. In this article, we show how…
We report the results of a combined study of the normal state resistivity and superconducting transition temperature $T_c$ of the unconventional superconductor Sr$_2$RuO$_4$ under uniaxial pressure. There is strong evidence that as well as…
Taking advantage of a novel multiprobe setup we have measured, on a unique sample, the ac-magnetic susceptibility, the resistivity, the ac-specific heat and the thermopower of the superconductor heavy fermion CeCu$_{2}$Si$_{2}$ under…
We have designed and developed a new experimental setup, based on the 3-omega method, to measure thermal conductivity, heat capacity and electrical resistivity of a variety of samples in a broad temperature range (2-550 K) and under…
Torsional oscillator (TO) is an experimental technique which is widely used to investigate superfluid responses in helium systems confined in porous materials or adsorbed on substrates. In these systems, heat capacity (HC) is also an…
Heat capacity measurements are a powerful tool that researchers rely on when studying the relationship between microscopic degrees of freedom and macroscopic behavior in condensed matter. This uniqueness stems from heat capacity capturing…