Related papers: High current $\mathrm{H}_2^+$ beams from a filamen…
This chapter describes the basic principles, design features and characteristics of microwave discharge ion sources. A suitable source for the production of intense beams for high-power accelerators must satisfy the requirements of high…
A gyrokinetic simulation of the influence of electron cyclotron current drive and ion kinetic effect on the m/n=2/1 tearing mode (TM) instabilities is presented in HL-2A and DIII-D tokamak configurations. The TM evolution is calculated with…
Neutrino physics is a forefront topic of today's research. Large detectors installed underground study neutrino properties using neutrino beams from muons decaying in flight. DAEdALUS looks at neutrinos from stopped muons, "decay at rest"…
The Heating Neutral Beam Injectors (HNBs) for ITER will have to deliver 16.7 MW beams of H/D particles at 1 MeV energy. The beams will be produced from H-/D- ions, generated by a radiofrequency plasma source coupled to an ion acceleration…
Design studies, for accelerator modules based on an injector cyclotron and a superconducting ring cyclotron able to accelerate H$_2^+$ molecules, are presented. H$_2^+$ molecules are stripped by a foil creating a proton beam, with a maximum…
The SPIDER experiment, operated at the Neutral Beam Test Facility of Consorzio RFX, Padua, hosts the prototype of the H-/D- ion source for the ITER neutral beam injectors. The maximization of the ion current extracted from the source and…
The irradiation with fast ions with kinetic energies of > 10 MeV leads to the deposition of a high amount of energy along their trajectory (up to several ten keV/nm). The energy is mainly transferred to the electronic subsystem and induces…
Nowadays, there is a desperate need for an ultra-acceleration-gradient method for antimatter particles, which holds great significance in exploring the origin of matter, CP violation, astrophysics, and medical physics. Compared to…
One of the fundamental challenges for future leptonic colliders and neutrino factories as well as for high-sensitivity studies of lepton universality is to design and construct new high-intensity sources of muons and positrons. The…
One of the possible ways to maintain the micrometer spatial resolution while performing ion beam analysis in the air is to increase the energy of ions. In order to explore capabilities and limitations of this approach, we have tested a…
The paper presents recent results of a "point-like" neutron source development based on a D-D fusion in a D-loaded target caused by its bombardment with a sharply focused deuterium ion beam. These developments are undergoing at the…
Bright and broadband coherent mid-IR radiation is important for exciting and probing molecular vibrations. Using cascaded nonlinearities in conventional quadratic nonlinear crystal like lithium niobate, self-defocusing near-IR solitons have…
The concept of large-radius multistage coaxial cyclotrons having separated orbits is described, to generate proton beams of 120-2000 MeV energy at tens of GW pulsed and hundreds of MW in continuous beam power operation. Accelerated beam…
This Preliminary Design Report (PDR) describes the IsoDAR electron-antineutrino source in two volumes which are mostly site-independent and describe the cyclotron driver providing a 60 MeV, 10 mA proton beam (this Volume); and the medium…
At Central Michigan University we are developing a high-precision Penning trap mass spectrometer (CHIP-TRAP)that will focus on measurements with long-lived radioactive isotopes. CHIP-TRAP will consist of a pair of hyperbolic…
IsoDAR seeks to place a high-power-cyclotron and target combination, as an intense source of $\bar{\nu}_e$ at the level of $\sim 10^{23}$/year, close to a kiloton-scale neutrino detector in order to gain sensitivity to very short-baseline…
The vacuum arc ion source has evolved into a more or less standard laboratory tool for the production of high-current beams of metal ions, and is now used in a number of different embodiments at many laboratories around the world.…
A fast-reading current integrator is developed for high time-resolution and low-noise ion beam diagnostics under both continuous-wave and pulsed operating conditions. The system combines a low-leakage transimpedance front-end with a hybrid…
The sustainment of steady-state plasmas in tokamaks requires efficient current drive systems. Lower Hybrid Current Drive (LHCD) is currently the most efficient method to generate a continuous additional off-axis toroidal plasma current as…
A superconducting (SC) linac is expected to lead to outstanding discoveries in various scientific fields because its beam current is a few orders of magnitude larger than in a normal-conducting linac. However, the widespread use of SC linac…