Related papers: Creep in reactive colloidal gels: a nanomechanical…
Long-term creep (i.e., deformation under sustained load) is a significant material response that needs to be accounted for in concrete structural design. However, the nature and origin of creep remains poorly understood, and controversial.…
The relationship between humidity and water content in a hydrating cement paste is largely controlled by the nanostructure of the C-S-H gel. Current hydration models do not describe this nanostructure, thus sorption isotherms and…
Mechanical creep behaviors of natural gas hydrates (NGHs) are of importance for understanding mechanical instability of gas hydrate-bearing sediments on Earth. Limited by the experimental challenges, intrinsic creep mechanisms of…
Granular packings display a wealth of mechanical features which are of widespread significance. One of these features is creep: the slow deformation under applied stress. Creep is common for many other amorphous materials such as many…
In this article, we investigate the creep mechanism of clay at the nanoscale. We conduct the molecular dynamics (MD) modeling of clay samples consisting of hexagonal particles under compression and shear. The MD simulations include…
Understanding the physical origin of creep in calcium--silicate--hydrate (C--S--H) is of primary importance, both for fundamental and practical interest. Here, we present a new method, based on molecular dynamics simulation, allowing us to…
Yield stress materials fail when the imposed stress crosses a critical threshold. A well-known dynamical response to the applied stress is the phenomenon of creep where the cumulative deformation grows sublinearly with time, prior to…
Creep is a generic descriptor of slow motions -- in the context of materials, it describes quasi-static deformation of a solid when subjected to stresses below the global yield, at which all rigidity collapses and the material flows. Here,…
The roles of applied strain and temperature on the hydration dynamics of cement paste are uncovered in the present study. We find that the system hardens over time through two different aging processes. The first process dominates the…
For corrosion-induced cracking in reinforced concrete, naturally occurring corrosion rates are so low that rust accumulates often over tens of years near the surface of the reinforcement bars before sufficient pressure in the surrounding…
Capillary effects such as imbibition-drying cycles impact the mechanics of granular systems over time. A multiscale poromechanics framework was applied to cement paste, that is the most common building material, experiencing broad humidity…
We numerically investigate the athermal creep deformation of amorphous materials having a wide range of stability. The imposed shear stress serves as the control parameter, allowing us to examine the time-dependent transient response…
The stress-induced yielding scenario of colloidal gels is investigated under rough boundary conditions by means of rheometry coupled to local velocity measurements. Under an applied shear stress, the fluidization of gels made of attractive…
The solidification theory has been accepted as a thermodynamically sound way to describe the creep reduction due to deposition of hydrated material in the pores of concrete. The concept of self-equilibrated nanoscale microprestress has been…
Mechanical properties are of central importance to materials sciences, in particular if they depend on external stimuli. Here we investigate the rheological response of amorphous solids, namely col- loidal glasses, to external forces. Using…
The early stiffening of fresh cement paste plays a key role in shaping and stability during casting and 3D printing. In Portland cement systems, this phenomenon arises from the formation of calcium-silicate-hydrate (C-S-H), which stiffens…
Supercrystalline nanocomposites (SCNCs) are inorganic-organic hybrid materials with a unique periodic nanostructure, and as such they have been gaining growing attention for their intriguing functional properties and parallelisms with…
Cement is one of the most produced materials in the world. A major player in greenhouse gas emissions, it is the main binding agent in concrete, to which it provides a cohesive strength that rapidly increases during setting. Understanding…
Creep mechanisms in uniaxially compressed 3D granular solids comprised of faceted frictionless grains are studied numerically using a constant pressure and constant stress simulation method. Rapid uniaxial compression followed by slow…
We investigate the down-hill creep of a layer of granular material on a slope caused by an oscillatory variation of the size of the particles. The material is modeled as an athermal two dimensional polydisperse system of soft disks under…