Related papers: The influence of material properties and process p…
With a growing demand for high-quality fabrication, the interest in real-time process and defect monitoring of laser powder bed fusion (LPBF) has increased, leading manufacturers to incorporate a variety of online sensing methods including…
Surface characteristics are a major contributor to the in-service performance, particularly fatigue life, of additively manufactured (AM) components. Centrifugal disk finishing (CDF) is one of many rigid media, abrasive machining processes…
During the laser powder bed fusion (L-PBF) process, the built part undergoes multiple rapid heating-cooling cycles, leading to complex microstructures with nonuniform properties. In the present work, a computational framework, which weakly…
Parameter sharing has proven to be a parameter-efficient approach. Previous work on Transformers has focused on sharing parameters in different layers, which can improve the performance of models with limited parameters by increasing model…
The tuning of fused filament fabrication parameters is notoriously challenging. We propose an autonomous data-driven method to select parameters based on in situ measurements. We use a laser sensor to evaluate the surface roughness of a…
3D printing technologies are currently enabling the fabrication of objects with complex architectures and tailored properties. In such framework, the production of 3D optical structures, which are typically based on optical transparent…
The quantitative phase-field approach has been adapted to model solidification in the presence of Metal Matrix Nanocomposites (MMNCs) in a single-component liquid. Nanoparticles of fixed size and shape are represented by additional fields.…
The propagation of a 3D crack in an heterogeneous material is studied using a phase field model. It is shown that in the case of randomly distributed inclusions of soft material in a matrix, the nature of the distribution has little effect…
This work investigates a method for pre-screening material systems for Selective Laser Sintering (SLS) using a combination of Revolution Powder Analysis (RPA) and machine learning. To develop this method, nylon was mixed with alumina or…
Brittle solids are often toughened by adding a second-phase material. This practice often results in composites with material heterogeneities on the meso scale: large compared to the scale of the process zone but small compared to that of…
Two-dimensional Particle Tracking Velocimetry (PTV) is a promising technique to study the behaviour of granular flows. The aim is to experimentally determine the free surface width and position of the shear band from the velocity profile to…
Additive manufacturing (AM) enables the development of high-performance architected cellular materials, emphasizing the growing importance of establishing programmable and predictable energy absorption capabilities. This study evaluates the…
The properties of polymer liquids on hard and soft substrates are investigated by molecular dynamics simulation of a coarse-grained bead-spring model and dynamic single-chain-in-mean-field (SCMF) simulations of a soft, coarse-grained…
Reduced iron-bearing materials start softening in the cohesive zone of a blast furnace due to the high temperature and the weight of the burden above. Softening process causes a reduction of void space between particles. As a result, the…
Previous work on additively-manufactured oxide dispersion strengthened alloys focused on experimental approaches, resulting in larger dispersoid sizes and lower number densities than can be achieved with conventional powder metallurgy. To…
Fatigue properties of additively manufactured (AM) materials depend on many factors such as AM processing parameter, microstructure, residual stress, surface roughness, porosities, post-treatments, etc. Their evaluation inevitably requires…
Porous bleed systems are a common technique to control shock-boundary layer interactions and/or supersonic boundary layers. However, the influence of various design parameters is still unknown. Even though bleed models are required to…
Dense particle-fluid mixtures, or \emph{pastes}, are encountered in the production of various materials, including animal feed, human food, pharmaceuticals, and biomass for bioenergy. The flow behavior of such dense deformable particulate…
Thermal modeling of Laser Powder Bed Fusion (LPBF) is challenging due to steep, rapidly moving thermal gradients induced by the laser, which are difficult to resolve accurately with conventional Finite Element Methods. Highly refined,…
3D printing is rapidly becoming an effective means of prototyping and creating custom consumer goods. The most common method for printing a polymer melt is fused filament fabrication (FFF), and involves extrusion of a thermoplastic material…