Related papers: High Brightness Lasing at Sub-micron Enabled by Dr…
We demonstrate the use of [2-($\textit{9H}$-carbazol-9-yl)ethyl]phosphonic acid (2PACz) and [2-(3,6-di-$\textit{tert}$-butyl-$\textit{9H}$-carbazol-9-yl)ethyl]phosphonic acid (t-Bu-2PACz) as anode modification layers in metal-halide…
Electrically driven light sources are essential in a wide range of applications, from indication and display technologies to high-speed data communication and quantum information processing. Wide-bandgap semiconductors promise to advance…
Significant efficiency droop is a major concern for light-emitting diodes and laser diodes operating at high current density. Recent study has suggested that heavily Bi-alloyed GaAs can decrease the non-radiative Auger recombination and…
We demonstrate absorber-free passive and hybrid mode-locking at sub-GHz repetition rates using a hybrid integrated extended cavity diode laser around 1550 nm. The laser is based on InP as gain medium and a long Si$_3$N$_4$ feedback circuit,…
Better wall plug efficiency of deep-ultraviolet light emitting diodes (DUV-LEDs) requires simultaneous low resistivity p-type and n-type contacts, which is a challenging problem. In this study, the co-optimization of p-InGaN and n- AlGaN…
We compare the temperature dependence of optical and electrical characteristics of commercially available GaN light-emitting diodes (LEDs) grown on silicon and sapphire substrates. Contrary to conventional expectations, LEDs grown on…
The performance of novel n-in-p planar pixel detectors, designed for future upgrades of the ATLAS Pixel system is presented. The n-in-p silicon sensors technology is a promising candidate for the pixel upgrade thanks to its radiation…
The light output of deep ultraviolet (UV-C) AlGaN light-emitting diodes (LEDs) is limited due to their poor light extraction efficiency (LEE). To improve the LEE of AlGaN LEDs, we developed a fabrication technology to process AlGaN LEDs…
The development of n-on-p "edgeless" planar pixel sensors being fabricated at FBK (Trento, Italy), aimed at the upgrade of the ATLAS Inner Detector for the High Luminosity phase of the Large Hadron Collider (HL-LHC), is reported. A…
We develop ZnO/p-Si photodetectors by atomic layer deposition (ALD) of ZnO thin films on laser-microstructured silicon and we investigate their electrical and optical behavior, demonstrating high sensitivity and broadband operation.…
Record wall-plug efficiencies in long-wavelength, III-nitride light-emitting diodes (LEDs) have recently been achieved through improvements in electrical efficiency in devices containing V-defects. Numerical modeling suggests this may be…
CMOS-compatible short- and mid-wave infrared emitters are highly coveted for the monolithic integration of silicon-based photonic and electronic integrated circuits to serve a myriad of applications in sensing and communications. In this…
Lighting and display, relying on electric and optical down-conversion emission with sluggish power efficiency, account for >15% global electricity consumption1,2. In 2014, quantum-dot (QD) LEDs (QLEDs) with near-optimal external quantum…
We report the observation of a Purcell enhancement in the electroluminescence decay rate of a single quantum dot, embedded in a microcavity light-emitting-diode structure. Lateral confinement of the optical mode was achieved using an…
A liquid-core (LiCo) dye laser was demonstrated using Rhodamine B (RhB) dissolved in glycerol as the gain medium and fluorinated ethylene propylene (FEP) tubing as the waveguide. Photoluminescence and amplified spontaneous emission (ASE)…
N-polar GaN p-n diodes are realized on single-crystal N-polar GaN bulk wafers by plasma-assisted molecular beam epitaxy growth. The current-voltage characteristics show high-quality rectification and electroluminescence characteristics with…
Cryogenic operation in conjunction with new test-mass materials promises to reduce the sensitivity limitations from thermal noise in gravitational-wave detectors. The currently most advanced materials under discussion are crystalline…
We show that up to 90% reflectivity can be achieved by using guided plasmonic resonances in a one-dimensional periodic array of plasmonic nanoribbon. In general, to achieve strong reflection from a guided resonance system requires one to…
We present two compact ultrafast electron injector designs with integrated focusing that provide high peak brightness of up to $1.9*10^{12} A/m^2Sr^2$ with 10s of electrons per laser pulse using silicon carbide electrodes and silicon…
Recently, the use of bottom-TJ geometry in LEDs, which achieves N-polar-like alignment of polarization fields in conventional metal-polar orientations, has enabled enhancements in LED performance due to improved injection efficiency. Here,…