Related papers: Achieving highly strengthened Al-Cu-Mg alloy by gr…
A complex study of aging kinetics for both coarse-grained and nanostructured by severe plastic deformation Cu -- 2 wt% Be alloy is reported. It is shown that aging of a coarse-grained alloy leads to continuous formation of nanosized CuBe…
Composite materials comprising a porous Ti2AlC matrix and Al 6061 alloy were fabricated by a current-activated pressure assisted melt infiltration process. Coarse, medium and fine meso-structures were prepared with Al alloy filled pores of…
Magnesium (Mg) alloys have shown great prospects as both structural and biomedical materials, while poor corrosion resistance limits their further application. In this work, to avoid the time-consuming and laborious experiment trial, a…
There are still debates regarding the mechanisms that lead to hot cracking in parts build by additive manufacturing (AM) of non-weldable Ni-based superalloys. This lack of in-depth understanding of the root causes of hot cracking is an…
Grain boundary (GB) segregation in magnesium (Mg) substantially influences its mechanical properties and performance. Atomic-scale modelling, typically using ab-initio or semi-empirical approaches, has mainly focused on GB segregation at…
The MgB2 bulks were prepared by high energy milling of Mg and B powder. The correlations among milling times, microstructure and superconducting properties were investigated in MgB2 bulks. Samples were characterized by x-ray diffraction…
The effect of Mg content on the natural ageing of Al-Cu-Li-(Mg) alloys has been investigated on a compositionally graded material made by linear friction welding, allowing to probe Mg contents between 0 and 0.4 at.%. High throughput…
ThMn12-type (Sm,Zr)1(Fe,Co,Ti)12 compounds show great potential for permanent magnets. Magnetically hard anisotropic powders prepared via reduction-diffusion exhibit a significant increase in coercivity from 0.45 T to 1.26 T as the…
Hybrid Monte Carlo (MC)/molecular dynamics (MD) simulations are conducted to study the microstructures of nanocrystalline (nc) Cu/Ag alloys with various Ag concentrations. When the Ag concentration is below 50 Ag atoms/nm!, an increase in…
Solute segregation at grain boundaries (GBs) of polycrystals strongly impacts the mechanical properties of metals including strength, fracture, embrittlement, and corrosion. However, the complexity of GB structures and the large chemical…
The V-Ti alloys are promising materials as alternate to the commercial Nb-based superconductors for high current-high magnetic field applications. However, the critical current density (J_c) of these alloys are somewhat low due to their low…
The combined strengthening effects of grain refinement and high precipitated volume fraction (~6at.%) on the mechanical properties of FeSiTi alloy subjected to SPD processing prior to aging treatment were investigated by atom probe…
We design, fabricate and test heterogeneous architected polycrystals, composed of hard plastomers and soft elastomers, which thus show outstanding mechanical resilience and energy dissipation simultaneously. Grain boundaries that separate…
The mechanical properties of Cu-Ti alloys have been characterized extensively through experimental studies. However, a detailed understanding of why the strength of Cu increases after a small fraction of Ti atoms is added to the alloy is…
A new class of crack-resistant nickel-based superalloy containing high $\gamma^\prime$ fraction is studied for the laser-powder bed fusion (L-PBF) process. The effects of the (Nb+Ta)/Al ratio is emphasised, a strategy that is shown to…
Considering the sensitivity of both fatigue strength and corrosion rate to the surface characteristics, apposite surface treatments could address the related challenges for biodegradable magnesium-based materials. Herein, we treated the…
We report on the results of a comparative investigation of highly dense bulk MgB$_2$ samples prepared by three methods: (i) hot deformation; (ii) high pressure sintering; and (iii) mechanical alloying of Mg and B powders with subsequent hot…
Solid-solution strengthening results from solutes impeding the glide of dislocations. Existing theories of strength rely on solute-dislocation interactions, but do not consider dislocation core structures, which need an accurate treatment…
Mixtures of Fe and Cu powders are cold-compacted and subsequently deformed with severe plastic deformation by high-pressure torsion, leading to bulk samples. The dilution of Fe in the Cu matrix is investigated with SQUID-magnetometry,…
Zinc alloys are recognised for their excellent biocompatibility and favourable corrosion rates, making them suitable for bioabsorbable implants. However, their mechanical properties necessitate improvement to fulfil the rigorous…