Related papers: Fatigue cracking in gamma titanium aluminide
Upon cooling, branched line defects develop in epitaxial graphene grown at high temperature on Pt(111) and Ir(111). Using atomically resolved scanning tunneling microscopy we demonstrate that these defects are wrinkles in the graphene…
The growth dynamics of a single crack in a heterogeneous material under subcritical loading is an intermittent process; and many features of this dynamics have been shown to agree with simple models of thermally activated rupture. In order…
The effect of hydrogen on the fracture behaviour of austenitic stainless steel has been investigated in the past [1][2]. It has been reported that fracture initiates by void formation at inclusions and regions of enhanced strain…
Recent experimental studies have observed a surprisingly wide range of strengths in polycrystalline graphene. Previous computational investigations of graphene tilt boundaries have highlighted the role of interfacial topology in determining…
Due to the augmentation of the significance of wind energy, giving a high priority to the \text{airfoil's} efficiency enhancement is obligatory. To improve the performance of airfoils, many impressive techniques are already invented. In…
The fracture toughness of Al/SiC nanolaminates with different layer thicknesses (in the range 10 to 100 nm) was measured by means of micropillar splitting and bending of a notched beam. The crack plane was perpendicular to the layers in the…
In functionally graded materials (FGMs) fabricated using directed energy deposition (DED) additive manufacturing (AM), cracks may form due to interdendritic stress during solidification, the formation of intermetallics, or the buildup of…
We have carried out plastic deformation experiments on single-phase samples of the body centered ZrNbTiVHf high-entropy alloy between room temperature and 1150 K. The experiments were carried out on polycrystalline samples with two…
Using dynamic simulations and analytic methods, we study the elastic response of a helical filament subject to uniaxial tension over a wide range of bend and twist persistence length. A low-pitch helix at low temperatures exhibits a…
Brittle fracture is one of the important failure modes of Single-Walled Carbon Nanotube (SWNT) due to mechanical loading. In this paper, the fracture resistance of zigzag SWNTs with preexisting defects is calculated using fracture mechanics…
The two years experience with Active Metal Casting flat bonds shows that this technology is suitable for the heat fluxes expected in Tore Supra (10 MW/m${}^2$). Tests were pursued up to 3330 cycles, with elements still functional. At higher…
The evolution of the nuclear and magnetic structures of TlFe$_{1.6}$Se$_2$ was determined in the temperature range of 5-450\,K using single crystal neutron diffraction. The Fe layers in these materials develop a corrugation in the…
The present work deals with the microstructure and texture evolutions of a TWIP high entropy alloy at various temperatures. Toward this end, the tensile tests were conducted at temperatures ranging from 298 to 873 K under the strain rate of…
Memory and aging behaviors in stage-2 CoCl$_{2}$ GIC ($T_{cu}$ = 8.9 K and $T_{cl}$ = 6.9 K) have been studied using low frequency ($f$ = 0.1 Hz) AC magnetic susceptibility ($\chi^{\prime}$ and $\chi^{\prime\prime}$) as well as…
To clarify effects of crack speed and cross-link density on fracture energy of acrylamide gels, we evaluated the roughness of the fracture surface and measured the fracture energy taking into account the roughness. The fracture energy…
Phase field fracture models have seen widespread application in the last decade. Among these applications, its use to model the evolution of fatigue cracks has attracted particular interest, as fatigue damage behaviour can be predicted for…
When a flat sample of medium density fibreboard (MDF) is exposed to radiant heat in an inert atmosphere, primary crack patterns suddenly start to appear over the entire surface before pyrolysis and any charring occurs. Contrary to common…
Samples of $\alpha$-SiC have been sintered with liquid phase (LPS) to 1950 $^\circ$C, in atmosphere of argon and processing times between 1 and 7 hours. Using scanning electron microscopy (SEM) the microstructure of the samples has been…
Creep deformation behaviour in single phase $\gamma$-TiAl alloy has been an extensively studied topic since the late 1970s. A lot of literatures have reported creep behaviour of $\gamma$-TiAl alloys, manufactured using different processing…
The microstructural development in H13 tool steel upon nitriding by an ion beam process was investigated. The nitriding experiments were performed at a relatively low temperature of about 400\deg C and at constant ion beam energy (400 eV)…