Related papers: Fourier DiffuserScope: Single-shot 3D Fourier ligh…
Volumetric optical microscopy using non-diffracting beams enables rapid imaging of 3D volumes by projecting them axially to 2D images but lacks crucial depth information. Addressing this, we introduce MicroDiffusion, a pioneering tool…
This article presents a method to perform diffraction tomography in a standard microscope that includes an LED array for illumination. After acquiring a sequence of intensity-only images of a thick sample, a ptychography-based…
An approach reported recently by Alexandrov et al. on optical scatter imaging, termed digital Fourier microscopy (DFM), represents an adaptation of digital Fourier holography to selective imaging of biological matter. Holographic mode of…
We demonstrate a simple scheme for high-resolution imaging of nanoplasmonic structures that basically removes most of the resolution limiting allowed light usually transmitted to the far field. This is achieved by implementing a Fourier…
Light field (LF) imaging captures both angular and spatial light distributions, enabling advanced photographic techniques. However, micro-lens array (MLA)- based cameras face a spatial-angular resolution tradeoff due to a single shared…
Single-shot fluorescence imaging techniques have gained increasing interest in recent years due to their ability to rapidly capture complex biological data without the need for extensive scanning. In this letter, we introduce polarized…
Localization microscopy is an imaging technique in which the positions of individual nanoscale point emitters (e.g. fluorescent molecules) are determined at high precision from their images. This is the key ingredient in…
We developed a Bessel light sheet fluorescence microscopy (LSFM) system to enable high-speed, wide-field intra-vital imaging of zebrafish and other thick biological samples. This system uses air objectives for the convenient mounting of…
This paper presents an application of digital Fourier holography for selective imaging of scatterers with different sizes in turbid media such as biological tissues. A combination of Fourier holography and high-resolution digital recording,…
We demonstrate a high-NA (0.88), ultra-low-f-number (f/0.2714), multi-wavelength (480nm, 550nm and 650nm) multilevel diffractive MicroLens Array (MLA) using inverse design. Each microlens in the array is close-packed with diameter of 70…
A lens performs an approximately one-to-one mapping from the object to the image planes. This mapping in the image plane is maintained within a depth of field (or referred to as depth of focus, if the object is at infinity). This…
Light-field imaging facilitates the miniaturization of 3D cameras while it requires the extension of the depth-of-field (DoF) for practical applications such as endoscopy and intraoral scanning. Here we report a light-field camera (LFC)…
Fourier Ptychographic Microscopy (FPM) is a computational imaging method that is able to super-resolve features beyond the diffraction-limit set by the objective lens of a traditional microscope. This is accomplished by using synthetic…
We introduce the use of a crossed pair of Multilayer Laue Lenses (MLLs) as an objective in Dark-Field X-ray Microscopy (DFXM). In a demonstration experiment at the ID03 beamline at ESRF, two flat Mo-Si MLLs were used, with a physical…
Light-field microscopy (LFM) enables rapid volumetric imaging through single-frame acquisition and fast 3D reconstruction algorithms. The high speed and low phototoxicity of LFM make it highly suitable for real-time 3D fluorescence imaging,…
Light-field microscopy represents a promising solution for microscopic volumetric imaging, thanks to its capability to encode information on multiple planes in a single acquisition. This is achieved through its peculiar simultaneous capture…
Fourier single-pixel imaging (FSI) has proven capable of reconstructing high-quality two-dimensional and three-dimensional images. The utilization of the sparsity of natural images in Fourier domain allows high-resolution images to be…
Three-dimensional microscopy is often limited by anisotropic spatial resolution, resulting in lower axial resolution than lateral resolution. Current State-of-The-Art (SoTA) isotropic reconstruction methods utilizing deep neural networks…
Lensless cameras based on thin diffusers offer a compact alternative to conventional refractive imaging but rely on computational reconstruction, since the diffuser's point spread function (PSF) globally multiplexes every scene point across…
Fourier optics, the principle of using Fourier Transformation to understand the functionalities of optical elements, lies at the heart of modern optics, and has been widely applied to optical information processing, imaging, holography etc.…