Related papers: A Nonlinear Navigation Observer Using IMU and Gene…

This paper investigates the problem of attitude and air velocity estimation for fixed-wing unmanned aerial vehicles (UAVs) using IMU measurements and at least one Pitot tube measurement, with almost global asymptotic stability (AGAS)…

An inertial navigation system (INS) utilizes three orthogonal accelerometers and gyroscopes to determine platform position, velocity, and orientation. There are countless applications for INS, including robotics, autonomous platforms, and…

The paper presents a new observer for tilt estimation of a 3-D non-rigid pendulum. The system can be seen as a multibody robot attached to the environment with a ball joint. There is no sensor for the joint position of the sensor. The…

A self-contained autonomous dead reckoning (DR) system is desired to complement the Global Navigation Satellite System (GNSS) for land vehicles, for which odometer-aided inertial navigation system (ODO/INS) is a classical solution. In this…

This paper presents a robust non-linear state estimator for autonomous surface vehicles, where the movement is restricted to the horizontal plane. It is assumed that only the vehicle position and orientation can be measured, being the…

Real-time human motion reconstruction from a sparse set of (e.g. six) wearable IMUs provides a non-intrusive and economic approach to motion capture. Without the ability to acquire position information directly from IMUs, recent works took…

Pose estimation purely based on 3D point-cloud could suffer from degradation, e.g. scan blocks or scans in repetitive environments. To deal with this problem, we propose an approach for fusing 3D spinning LiDAR and IMU to estimate the…

Autonomous helicopter landing is a challenging task that requires precise information about the aircraft states regarding the helicopters position, attitude, as well as position of the helipad. To this end, we propose a solution that fuses…

Treating IMU measurements as inputs to a motion model and then preintegrating these measurements has almost become a de-facto standard in many robotics applications. However, this approach has a few shortcomings. First, it conflates the IMU…

In recent years, Onboard Self Localization (OSL) methods based on cameras or Lidar have achieved many significant progresses. However, some issues such as estimation drift and feature-dependence still remain inherent limitations. On the…

Foot-mounted inertial sensors become popular in many indoor or GPS-denied applications, including but not limited to medical monitoring, gait analysis, soldier and first responder positioning. However, the foot-mounted inertial navigation…

Building a complete inertial navigation system using the limited quality data provided by current smartphones has been regarded challenging, if not impossible. This paper shows that by careful crafting and accounting for the weak…

The robust estimation of the mounting angle for millimeter-wave automotive radars installed on moving vehicles is investigated. We propose a novel signal processing pipeline that combines radar and inertial measurement unit (IMU) data to…

There is a great demand for vision-based robotics solutions that can operate using Global Positioning Systems (GPS), but are also robust against GPS signal loss and gyroscope failure. This paper investigates the estimation and tracking…

We propose a multi-sensor fusion method for capturing challenging 3D human motions with accurate consecutive local poses and global trajectories in large-scale scenarios, only using single LiDAR and 4 IMUs, which are set up conveniently and…

We propose an accurate and robust multi-modal sensor fusion framework, MetroLoc, towards one of the most extreme scenarios, the large-scale metro vehicle localization and mapping. MetroLoc is built atop an IMU-centric state estimator that…

The process of simultaneously mapping the environment in three dimensional (3D) space and localizing a moving vehicle's pose (orientation and position) is termed Simultaneous Localization and Mapping (SLAM). SLAM is a core task in robotics…

To improve the accuracy and robustness of the inertial navigation systems (INS) for wheeled robots without adding additional component cost, we propose Wheel-INS, a complete dead reckoning solution based on a wheel-mounted…

A monocular 3D object tracking system generally has only up-to-scale pose estimation results without any prior knowledge of the tracked object. In this paper, we propose a novel idea to recover the metric scale of an arbitrary dynamic…

Motion capture using sparse inertial sensors has shown great promise due to its portability and lack of occlusion issues compared to camera-based tracking. Existing approaches typically assume that IMU sensors are tightly attached to the…