Related papers: I-mode pedestal relaxation events at ASDEX Upgrade

Injecting frozen deuterium pellets into an ELMy H-mode plasma is a well established scheme for triggering edge localized modes (ELMs) before they naturally occur. Based on an ASDEX Upgrade H-mode plasma, this article presents a comparison…

Edge localised modes (ELMs) are a concern for future devices as they can limit the operational lifetime of the divertor. The mitigation of ELMs can be performed by the application of resonant magnetic perturbations (RMPs) which act to…

The electromagnetic modes and their field distributions are evaluated for a dielectric cylindrical structure embedded in another dielectric, with a thin metallic film at the cylinder/dielectric interface. These modes provide energy…

Numerical modeling of the edge and scrape-off layer (SOL) must account for atomic processes such as hydrogenic ionization and recombination, charge-exchange, and line radiation. Their reaction rates depend non-linearly on density and…

Multi-machine empirical scaling predicts an extremely narrow heat exhaust layer in future high magnetic field tokamaks, producing high power densities that require mitigation. In the experiments presented, the width of this exhaust layer is…

The peak pressure gradient in the pedestal (dPe/d{\psi}) on MAST varies little between edge localized modes (ELMs), although it varies between discharges due factors such as gas fuelling and plasma current. The pressure pedestal width in…

A multidiagnostic approach, utilizing Langmuir probes in the midplane, X-point and divertor walls, along with Lithium beam and infrared measurements is employed to evaluate the evolution of the Scrape-off Layer (SOL) of ASDEX Upgrade across…

The complete refuelling of the plasma density loss (pump-out) caused by mitigation of Edge Localised Modes (ELMs) is demonstrated on the ASDEX Upgrade tokamak. The plasma is refuelled by injection of frozen deuterium pellets and ELMs are…

Global and local linear gyrokinetic simulations of 42 pedestal equilibria from three DIII-D discharges are used to investigate pedestal stability and its impact on pedestal structure and confinement. Microtearing modes (MTMs) and kinetic…

The role of impurity radiation in the reduction of heat loads on divertor plates in present experiments such as DIII-D, JET, JT-60, ASDEX, and Alcator C-Mod, and in planned experiments such as ITER and TPX places a new degree of importance…

Edge localised modes (ELMs) are a concern for future devices, such as ITER, due to the large transient heat loads they generate on the divertor surfaces which could limit the operational time of the device. This paper discusses the…

At low temperatures, dynamics in amorphous silicon occurs through a sequence of discrete activated events that locally reorganize the topological network. Using the activation-relaxation technique, a data base containing over 8000 such…

Owing to the high stored energy of ITER plasmas, the heat pulses due to uncontrolled Type I edge localized modes (ELMs) can be sufficient to melt the top surface of several poloidal rows of tungsten monoblocks in the divertor strike point…

The operational space and global performance of plasmas with edge-localized modes (ELMs) suppressed by resonant magnetic perturbations (RMPs) are surveyed by comparing AUG, DIII-D, EAST, and KSTAR stationary operating points. RMP-ELM…

Understanding the multi-scale neoclassical and turbulence physics in the edge region (pedestal + scrape-off layer) is required in order to reliably predict performance in future fusion devices. We explore turbulent characteristics in the…

Sustained ELM mitigation has been achieved on MAST and AUG using RMPs with a range of toroidal mode numbers over a wide region of low to medium collisionality discharges. The ELM energy loss and peak heat loads at the divertor targets have…

The rapid deposition of energy by Edge Localised Modes (ELMs) onto plasma facing components, is a potentially serious issue for large Tokamaks such as ITER and DEMO. The trigger for ELMs is believed to be the ideal Magnetohydrodynamic…

A summary of recent results on filamentary transport, mostly obtained in the ASDEX-Upgrade tokamak (AUG), is presented and discussed in an attempt to produce a coherent picture of SOL filamentary transport: A clear correlation is found…

2D electron density profiles obtained from coherence imaging spectroscopy in different MAST-U divertor conditions are compared. The data includes variations of strike point position, core electron density, and heating power. The improved…

Plasma detachment involves interactions of the plasma with impurities and neutral particles, leading to significant losses of plasma power, momentum, and particles. Accurate mapping of plasma emissivity in the divertor and X-point region is…