Related papers: An inverse designed achromatic flat lens operating…
Flat lenses enable thinner, lighter, and simpler imaging systems. However, large-area and high-NA flat lenses have been elusive due to computational and fabrication challenges. Here, we applied inverse design to create a multi-level…
Recently, the multilevel diffractive lenses (MDLs) have attracted considerable attention mainly due to their superior wave focusing performance; however, efforts to correct the chromatic aberration are still in progress. Here, we…
A lens performs an approximately one-to-one mapping from the object to the image planes. This mapping in the image plane is maintained within a depth of field (or referred to as depth of focus, if the object is at infinity). This…
It is generally assumed that correcting chromatic aberrations in imaging requires optical elements. Here, we show that by allowing the phase in the image plane to be a free parameter, it is possible to correct chromatic variation of focal…
We demonstrate a high-NA (0.88), ultra-low-f-number (f/0.2714), multi-wavelength (480nm, 550nm and 650nm) multilevel diffractive MicroLens Array (MLA) using inverse design. Each microlens in the array is close-packed with diameter of 70…
We demonstrate imaging over the visible band using a single planar diffractive lens. This is enabled via multi-level diffractive optics that is designed to focus over a broad wavelength range, which we refer to as an achromatic diffractive…
We designed and fabricated a flat multi-level diffractive lens (MDL) that is achromatic in the SWIR band (875nm to 1675nm). The MDL had a focal length of 25mm, aperture diameter of 8.93mm and thickness of only 2.6um. By pairing the MDL with…
It is generally thought that correcting chromatic aberrations in imaging requires multiple surfaces. Here, we show that by allowing the phase in the image plane of a flat lens to be a free parameter, it is possible to correct chromatic…
Recent theoretical work suggested upper bounds on the operating bandwidths of flat lenses. Here, we show how these bounds can be circumvented via a multi-level diffractive lens (MDL) of diameter = 100 mm, focal length = 200 mm, device…
We designed, fabricated and characterized a flat multi-level diffractive lens (MDL) comprised of only silicon with diameter = 15.2mm, focal length of 19mm, and operating over the longwave infrared (LWIR) spectrum of 8um to 14um. We…
It is generally thought that correcting chromatic aberrations in imaging requires multiple surfaces. Here, we show that by allowing the phase in the image plane of a flat lens to be a free parameter, it is possible to correct chromatic…
We present full-Maxwell topology-optimization design of a single-piece multlayer metalens, about 10 wavelengths~$\lambda$ in thickness, that simultaneously focuses over a $60^\circ$ angular range and a 23\% spectral bandwidth without…
Recently, there has been an explosion of interest in metalenses for imaging. The interest is primarily based on their sub-wavelength thicknesses. Diffractive lenses have been used as thin lenses since the late 19th century. Here, we show…
Integrating conventional optics into compact nanostructured surfaces is the goal of flat optics. Despite the enormous progress of this technology, there are still critical challenges for real world applications due to a limited efficiency…
Multilevel diffractive lenses (MDLs) have emerged as an alternative to both conventional diffractive optical elements (DOEs) and metalenses for applications ranging from imaging to holographic and immersive displays. Recent work has shown…
We introduce a novel method for creating a high-quality, sharply defined, non-diffracting optical bottle beam by focusing a Bessel beam propagating through a flat multi-level diffractive lens (MDL). This study highlights the impact of the…
We propose an efficient inverse design approach for multifunctional optical elements based on adaptive deep diffractive neural networks (a-D$^2$NNs). Specifically, we introduce a-D$^2$NNs and design two-layer diffractive devices that can…
Motivated by their great potential to reduce the size, cost and weight, flat lenses, a category that includes diffractive lenses and metalenses, are rapidly emerging as key components with the potential to replace the traditional refractive…
Recently, an achromatic metasurface was successfully demonstrated to deflect light of multiple wavelengths in the same direction and it was further applied to the design of planar lenses without chromatic aberrations [Science, 347,…
We use inverse design to discover metalens structures that exhibit broadband, achromatic focusing across low, moderate, and high numerical apertures. We show that standard unit-cell approaches cannot achieve high-efficiency high-NA…