Related papers: Airfoil Lift Calculation Using Wind Tunnel Wall Pr…
Airfoil noise is predicted and analyzed using wall-resolved large-eddy simulations and wavelet transforms for a NACA 0012 airfoil at a Mach number of 0.06 and a Reynolds number of 400,000 using a stair-strip forced transition and a natural…
We study experimentally a a three-dimensional reduced model of a sail shape performing pitching oscillations around a mean incidence angle ($\alpha_{m}$) with respect to an incoming flow in a hydrodynamic channel at a constant velocity…
We train active neural-network flow controllers using a deep learning PDE augmentation method to optimize lift-to-drag ratios in turbulent airfoil flows at Reynolds number $5\times10^4$ and Mach number 0.4. Direct numerical simulation and…
A normal pressure MWPC for beam diagnostics at RIBLL2 has been developed, which has a sensitive area of 80 mm$\times$80 mm and consists of three-layer wire planes. The anode plane is designed with a wider frame to reduce the discharge and…
Surface roughness elements are commonly used in wind tunnel testing to hasten the laminar-turbulent transition of the boundary layer in model tests to mimic the aerodynamic effects present in the full-scale application. These devices can…
Aerodynamic noise is a limitation for further exploitation of wind energy resources. As this type of noise is caused by the interaction of turbulent flow with the airframe, a detailed resolution of the flow is necessary to obtain an…
A low-order method is presented for aerodynamic prediction of wings operating at near-stall and post-stall flight conditions. The method is intended for use in design, modeling, and simulation. In this method, the flow separation due to…
Wall pressure fluctuations beneath the turbulent boundary layer of high-speed underwater vehicles are crucial for hydro-acoustics and acoustic stealth. However, a comprehensive understanding remains limited due to a lack of high-quality…
In order to study the effects of pressure gradients, flow expansion, and recompression on the stability of hypersonic boundary-layers, axisymmetric cone-cylinder-flare configurations have been specifically designed for wind tunnel…
During the phase of landing, an important aircraft-noise source emanates from the interaction of the landing-gear wake with the deployed flap. In the present work we cast this problem in an academic framework, by studying a simplified…
This paper examines the use of a pitot-static tube array (PSA) to estimate horizontal wind velocity in all directions. This method uses the readings from the PSA as inputs. No flight tests have been done, but this method could potentially…
In a combined experimental and numerical effort we investigate airfoil tonal noise generation and reduction. The means of noise control are streak generators in form of cylindrical roughness elements. These elements are placed periodically…
This work presents an investigation on different methods for the calculation of the angle of attack and the underlying induced velocity on wind turbine blades using data obtained from three-dimensional Computational Fluid Dynamics (CFD).…
In this paper, wall-modeled large-eddy simulation (WMLES) is carried out with Ffowcs-Williams and Hawkings (FW-H) acoustic analogy to investigate the turbulent flow and hydrodynamic noise of an axisymmetric body of revolution. We first…
The present study is first to provide experimental evidence of tonal noise and acoustic feedback by a stationary airfoil with a tip-gap placed between two side plates. Tones are linked to an aero-acoustic coupling using synchronized…
A Wankel steam expander has numerous advantages over other positive displacement machines as an expansion device. This is due to its high power to weight ratio, compactness, lower noise, vibration, and potentially lower specific cost making…
Efficiency increase is seen as one of the main goals in any energy converting device. In this direction, the present study aims to demonstrate that large-scale wind turbines can still be improved in order to generate larger amounts of…
Cornerstone of this research is the examination of fluid flow around NACA0012 airfoil, with the aim of the numerical validation between the experimental results in the wind tunnel and the Lattice Boltzmann Method (LBM) analysis, for the…
Recent research into buffet in the transonic flow regime has been focused on a limited number of proprietary airfoil geometries and has mainly considered parametric variations in Mach number and angle of attack. In contrast, relatively…
In the short letter, we explain an improved transform theory for colloidal-probe atomic force microscopy (CP-AFM). CP-AFM can measure a force curve between the colloidal probe and a wall surface in a colloidal dispersion. The transform…