Related papers: Beamwidth Selection for a Uniform Planar Array (UP…
This work conceives a Ring-Bayes channel learning framework that unifies Bayesian learning with near-field channel estimation in millimeter-wave (mmWave) hybrid MIMO systems. As the number of antennas scales up, users increasingly fall…
The millimeter-wave (mmWave) full-dimensional (FD) MIMO system employs planar arrays at both the base station and user equipment and can simultaneously support both azimuth and elevation beamforming. In this paper, we propose…
Omnidirectional path loss models are vital for radiosystem design in wireless communication systems, as they allow engineers to perform network simulations for systems with arbitrary antenna patterns. At millimeter-wave frequencies, channel…
Massive multiple-input multiple-output (MIMO) for 5G is evolving into the extremely large-scale antenna array (ELAA) to increase the spectrum efficiency by orders of magnitude for 6G communications. ELAA introduces spherical-wave-based…
A great increase in wireless access rates might be attainable by using the large amount of spectrum available in the millimeter wave (mmWave, 30 - 300 GHz) band. However, due to higher propagation losses inherent in these frequencies, to…
The transmitter signals in the fifth generation (5G) wireless networks suffer from significant path loss due to the use of higher frequencies in Sub-6 GHz and millimeter-wave (mmWave) bands. Therefore, beamforming is an essential and…
Beamforming techniques are considered as essential parts to compensate severe path losses in millimeter-wave (mmWave) communications. In particular, these techniques adopt large antenna arrays and formulate narrow beams to obtain…
With the deployment of large antenna arrays at high frequency bands, future wireless communication systems are likely to operate in the radiative near-field. Unlike far-field beam steering, near-field beams can be focused within a spatial…
High-frequency wideband cellular communications over mmWave and sub-THz offer the opportunity for high data rates. However, it also presents high path loss, resulting in limited coverage. High-gain beamforming from the antenna array is…
The use of millimeter wave (mmWave) spectrum for commercial wireless communications is expected to offer data rates in the order of Gigabits-per-second, thus able to support future applications such as Vehicle-to-Vehicle or…
Employing large antenna arrays is a key characteristic of millimeter wave (mmWave) and terahertz communication systems. Due to the hardware constraints and the lack of channel knowledge, codebook based beamforming/combining is normally…
The focus of this paper is on beamforming in a millimeter-wave (mmW) multi-input multi-output (MIMO) setup that has gained increasing traction in meeting the high data-rate requirements of next-generation wireless systems. For a given MIMO…
Since the spectrum below 6 GHz bands is insufficient to meet the high bandwidth requirements of 5G use cases, 5G networks expand their operation to mmWave bands. However, operation at these bands has to cope with a high penetration loss and…
This paper is on beamforming in wireless relay networks with perfect channel information at relays, the receiver, and the transmitter if there is a direct link between the transmitter and receiver. It is assumed that every node in the…
In this paper, we investigate the optimization of non-uniform linear antenna arrays (NULAs) for millimeter wave (mmWave) line-of-sight (LoS) multiple-input multiple-output (MIMO) channels. Our focus is on the maximization of the system…
Millimeter wave (mmWave) communication represents one of the main innovations of the next generation of wireless technologies, allowing users to reach unprecedented data rates. To overcome the high path loss at mmWave frequencies, these…
In vehicle-to-infrastructure (V2I) networks, a cluster of multi-antenna access points (APs) can collaboratively conduct transmitter beamforming to provide data services (e.g., eMBB or URLLC). The collaboration between APs effectively forms…
In this paper, we propose a beamwidth control-based non-orthogonal multiple access (NOMA) scheme for hybrid millimeter wave (mmWave) communication systems. In particular, the proposed scheme allows multiple users in one NOMA group to share…
Multiple-input multiple-output (MIMO) millimeter wave (mmWave) systems are vulnerable to hardware impairments due to operating at high frequencies and employing a large number of radio- frequency (RF) hardware components. In particular,…
We introduce, design, and evaluate a set of universal receiver beamforming techniques. Our approach and system DEFORM, a Deep Learning (DL) based RX beamforming achieves significant gain for multi antenna RF receivers while being agnostic…