Related papers: InFocus: A spatial coding technique to mitigate mi…

Employing large antenna arrays is a key characteristic of millimeter wave (mmWave) and terahertz communication systems. Due to the hardware constraints and the lack of channel knowledge, codebook based beamforming/combining is normally…

We present a beamforming algorithm for multiuser wideband millimeter wave (mmWave) communication systems where one access point uses hybrid analog/digital beamforming while multiple user stations have phased-arrays with a single RF chain.…

The mmWave communication system is operating at a regime with high number of antennas and very limited number of RF analog chains. Large number of antennas are used to extend the communication range for recovering the high path loss while…

Integrating radio-sensing functionalities into future cell-free (CF) wireless networks promises efficient resource utilization and facilitates the seamless roll-out of applications such as public safety and smart infrastructure. While the…

This paper introduces a two-and multi-level phase mask design for improved depth of focus. A novel technique is proposed incorporating cubic and generalized cubic wavefront coding (WFC). The obtained system is optical-electronic requiring…

Future wireless networks will utilize extremely large-scale antenna arrays (ELAAs) over high-frequency bands, which, however, produce near-field spherical wavefronts and spatial wideband effects. To exploit and mitigate these, this paper…

Multimode fibers (MMFs) can transmit multiple guided modes simultaneously, making them a promising platform for high-resolution biomedical imaging, endoscopy and high-bandwidth optical communication. However, their complex modal behavior,…

The concept of the frequency diverse reconfigurable intelligent surface (FD-RIS) technology has been introduced, which can enable simultaneous implementation of distance-angle beamforming in far-field communication scenarios. In order to…

A new method for the design of linear-phase robust far-field broadband beamformers using constrained optimization is proposed. In the method, the maximum passband ripple and minimum stopband attenuation are ensured to be within prescribed…

In near-field beam focusing for finite-sized arrays, focal shift is a non-negligible issue. The actual focal point often appears closer to the array than the predefined focal distance, significantly degrading the focusing performance of…

This paper studies a robust design problem for far-field line-of-sight (LOS) channels where phase errors are present. Compared with the commonly used additive error model, the phase error model is more suitable for capturing the uncertainty…

Meeting the high data rate demands of modern applications necessitates the utilization of high-frequency spectrum bands, including millimeter-wave and sub-terahertz bands. However, these frequencies require precise alignment of narrow…

This paper investigates beam training techniques for near-field (NF) extremely large-scale antenna arrays (ELAAs). Existing NF beam training methods predominantly rely on beam focusing, where the base station (BS) transmits highly spatially…

Designing unimodular waveforms with a desired beampattern, spectral occupancy and orthogonality level is of vital importance in the next generation Multiple-Input Multiple-Output (MIMO) radar systems. Motivated by this fact, in this paper,…

A radio interferometer uses time delays to maximize its response to radiation coming from a particular direction. These time delays compensate for differences in the time of arrival of the wavefront at the different elements of the…

Adaptive optics methods have long been used to perform complex light shaping at the output of a multimode fiber (MMF), with the specific aim of controlling the emitted beam in the near-field. Gaining control of other emission properties,…

Motivated by future automotive applications, we study some joint radar target detection and parameter estimation problems where the transmitter, equipped with a mono-static MIMO radar, wishes to detect multiple targets and then estimate…

In millimeter-wave communications (MMWC), in order to compensate for high propagation attenuation, phased arrays are favored to achieve array gain by beamforming, where transmitting and receiving antenna arrays need to be jointly trained to…

Enabling multi-target sensing in near-field integrated sensing and communication (ISAC) systems is a key challenge, particularly when line-of-sight paths are blocked. This paper proposes a beamforming framework that leverages a…

The problem of the real-time multiple-input multiple-output (MIMO) array control when requirements on capacity performance, out-of-cell interference, and computational efficiency are simultaneously enforced is addressed by means of an…