Related papers: Mid-infrared frequency combs at 10 GHz
Mid-infrared dual-comb spectroscopy has the potential to supplant conventional high-resolution Fourier transform spectroscopy in applications that require high resolution, accuracy, signal-to-noise ratio, and speed. Until now, dual-comb…
We present a high-power optical parametric oscillator-based frequency comb in the mid-infrared wavelength region using periodically poled lithium niobate. The system is synchronously pumped by a 10-W femtosecond Yb:fiber laser centered at…
We report on the generation of mid-infrared Kerr frequency combs in high-finesse CaF$_2$ and MgF$_2$ whispering-gallery mode resonators pumped with continuous wave room temperature quantum cascade lasers. The combs were centered at…
We experimentally demonstrate in a difference-frequency generation mid-infrared frequency comb source the effect of temporal overlap between pump- and signal- pulse to the relative intensity noise (RIN) of the idler pulse. When scanning the…
Optical frequency combs are key to optical precision measurements. While most frequency combs operate in the near-infrared regime, many applications require combs at mid-infrared, visible or even ultra-violet wavelengths. Frequency combs…
Frequency-modulated (FM) laser combs, which offer a periodic quasi-continuous-wave output and a flat-topped optical spectrum, are emerging as a promising solution for wavelength-division multiplexing applications, precision metrology, and…
We have generated frequency combs spanning 0.5 to 20 GHz in superconducting half wave resonators at T=3 K. Thin films of niobium-titanium nitride enabled this development due to their low loss, high nonlinearity, low frequency dispersion,…
The mid-infrared spectral range holds great promise for applications such as molecular spectroscopy and telecommunications. Many key molecules exhibit strong absorption features in this range, and free-space optical communication benefits…
We utilize silicon-nitride waveguides to self-reference a telecom-wavelength fiber frequency comb through supercontinuum generation, using 11.3 mW of optical power incident on the chip. This is approximately ten times lower than…
Frequency combs based on nonlinear-optical phenomena in integrated photonics are a versatile light source that can explore new applications, including frequency metrology, optical communications, and sensing. We demonstrate robust…
Dual-frequency comb spectroscopy has emerged as a disruptive technique for measuring wide-spanning spectra with high resolution, yielding a particularly powerful technique for sensitive multi-component gas analysis. We present a…
We demonstrate low-noise Kerr soliton frequency combs with repetition rates below 1~GHz in ultrahigh-Q crystalline magnesium fluoride resonators. Single soliton states with repetition rates of 0.90 GHz, 1.19 GHz, 1.59 GHz, 2.48 GHz, and…
Nonlinear interferometers allow for mid-infrared spectroscopy with near-infrared detection using correlated photons. Previous implementations have demonstrated a spectral resolution limited by spectrally selective detection. In our work, we…
We describe the design of a new family of high spectral brightness narrow linewidth (NLW) mid-infrared (MIR) lasers of < 1 MHz anticipated linewidths with potential for operation at any target wavelength between 2.5 and 9.5 um. More…
We devise a new detection technique for mid-infrared multi-heterodyne spectroscopy. As an experimental implementation, mid-infrared light interrogates a gas sample in the 3-$\mu$m region of the fundamental CH, OH, NH stretch in molecules…
Vibrational sum- and difference-frequency generation (SFG and DFG) spectroscopy probes the nonlinear response of interfaces at mid-infrared (MIR) wavelengths while detecting upconverted signals in the visible. Recent work has moved from…
We report ultra-low phase-noise microwave generation at a 9.6 GHz carrier frequency from optical frequency combs based on diode-pumped solid-state lasers emitting at telecom wavelength and referenced to a common cavity-stabilized…
We report on the generation of nanosecond mid-infrared pulses having frequency tunability, a narrow linewidth, and a high pulse energy. These pulses are obtained by frequency mixing between injection-seeded near-infrared pulses in potassium…
Optical frequency combs are indispensable links between the optical and microwave domains, enabling a wide range of applications including precision spectroscopy, ultrastable frequency generation, and timekeeping. Chip-scale integration…
Long-wavelength mid-infrared frequency combs with high power and flexible tunability are highly desired for molecular spectroscopy, including investigation of large molecules such as C60. We present a high power, phase-stabilized frequency…