Related papers: Structural, Electronic, and Magnetic Properties of…
We have successfully fabricated the nitrogen-doped cuprous oxide thin films on the amorphous standard soda-lime glass by reactive high-power impulse magnetron sputtering. The energy of film-forming particles was controlled by the value of…
Fueled by the 5G revolution, the demand for advanced radio frequency micro-electromechanical systems (MEMS) based on AlScN is growing rapidly. However, synthesizing high-quality, textured AlScN thin films is challenging. Current approaches…
The demand for efficient data processing motivates a shift toward in-memory computing architectures. Ferroelectric materials, particularly AlScN, show great promise for next-generation memory devices. However, their widespread application…
The correlation between magnetic and structural properties of Co_{2} FeAl (CFA) thin films of different thickness (10 nm<d< 100 nm) grown at room temperature on MgO-buffered Si/SiO2 substrates and annealed at 600\lyxmathsym{\textdegree}C…
We have investigated properties of superconducting titanium nitride (TiN) films that were sputtered over a large range of RF-induced DC bias voltage applied to the substrate. Films grown with the largest bias voltages contained cubic TiN…
Strained thin films of charge/orbital ordered (CO/OO) $Nd_{0.5}Ca_{0.5}MnO_3$ (NCMO) with various thickness have grown on (100)-SrTiO$_3$ and (100)-LaAlO$_3$ substrates, by using the Pulsed Laser Deposition (PLD) technique. The thickness of…
Understanding growth evolution and thereby implementing precise microstructural tuning of two-dimensional (2D) conjugated coordination polymers (cCPs) is crucial to achieve efficient electronic conduction towards their full potential and to…
We present a comparative study on the influence of applied magnetic field on the resistance of $C_{1-x}Co_x$ thin films (with $x=0.1$, $0.15$ and $0.2$) grown on $Si$ substrate by pulsed laser deposition technique. It is found that the…
Magnetic anisotropy in disordered rare-earth-transition metals (RE-TM) compounds arises from RE atoms occupying asymmetric environments within the TM lattice. However, the underlying mechanism that promotes such environments remains not…
We measured geometric and magnetic properties of Co films on the Pd(111) surface by x-ray photoelectron diffraction (XPD), x-ray magnetic circular dichroism (MCD) at the Co L_{2,3} edge, and the surface magneto-optical Kerr effect (SMOKE)…
Aluminum nitride (AlN) is an emerging material for integrated quantum photonics with its excellent linear and nonlinear optical properties. In particular, its second-order nonlinear susceptibility $\chi^{(2)}$ allows single-photon…
Epitaxial hcp Cobalt films with pronounced c-axis texture have been prepared by pulsed lased deposition (PLD) either directly onto Al2O3 (0001) single crystal substrates or with an intermediate Ruthenium buffer layer. The crystal structure…
The composition dependence of the structural, magnetic, and transport properties of epitaxially grown Mn-Co-Ga films were investigated. The crystal structure was observed to change from tetragonal to cubic as the Co content was increased.…
Manganite thin films are promising candidates for studying the strongly correlated electron systems. Understanding the growth-and morphology-driven changes in the physical properties of manganite thin films is vital for their applications…
Growth of Co film on SiO2 substrates with the surface roughness of 0.5 nm and 1.6 nm has been studied in situ using the magneto-optical Kerr effect (MOKE) and four probe resistivity measurements. In-situ measurements jointly suggest the…
Ionized physical vapor deposition techniques, such as high-power impulse magnetron sputtering (HiPIMS) are gaining popularity due to their ability to produce high-quality thin films at low deposition temperatures. In those techniques, ions…
Amorphous sputtered Co-based thin films are widely used as soft magnetic materials in applications such as sensors, inductors and magnetic flux concentrators. The magnetic properties of these films can be controlled by deposition parameters…
The effect of applying a positive voltage pulse (Urev = 10 - 150 V) directly after the negative high power impulse magnetron sputtering (HiPIMS) pulse (bipolar HiPIMS) is investigated for the reactive sputter deposition of TiN thin films.…
Co$_{2}$TiSi films were grown by molecular beam epitaxy on GaAs(001) and analyzed using reflection high-energy electron diffraction, and electron microscopy. In addition, X-ray diffraction was combined with lattice parameter calculations by…
The magnetic properties and magnetization dynamics of polycrystalline ultra-thin Co layers were investigated using a broadband ferromagnetic resonance (FMR) technique at room temperature. A variable thickness (1 nm $\leq t \leq$ 10 nm) Co…