Related papers: Laminar separated flows over finite-aspect-ratio s…
Nominal two-dimensional (2D) shear layers have been studied extensively, and their principal dynamics are well understood. In practical configurations, however, the behavior of such shear layers is affected by proximal surfaces. In this…
Transonic buffet is an unsteady flow phenomenon that limits the safe flight envelope of modern aircraft. Scale-resolving simulations with span-periodic boundary conditions are capable of providing new insights into its flow physics. The…
Recently, the authors considered a thin steady developed viscous liquid wall jet passing the sharp trailing edge of a horizontally aligned flat plate under surface tension and the weak action of gravity acting vertically in the asymptotic…
The unsteady separated flow over the three-dimensional Boeing Gaussian Bump is investigated at a Reynolds number based on bump height $Re_H = 2.26\times10^5$ using unsteady wall-pressure measurements and planar particle image velocimetry…
Direct numerical simulations are carried out to investigate the flow features responsible for secondary tones arising in trailing-edge noise at moderate Reynolds numbers. Simulations are performed for a NACA 0012 airfoil at freestream Mach…
In order to shed light on the Vertical-Axis Wind Turbines (VAWT) wake characteristics, in this paper we present high-fidelity CFD simulations of the flow around an exemplary H-shaped VAWT turbine, and we propose to apply Proper Orthogonal…
Large Eddy Simulations of a flow at a moderate Reynolds number over and around a three-dimensional hill have been performed. The main aim of the simulations was to study the effects of various inflow conditions (boundary layer thickness and…
We report on a series of fully resolved simulations of the flow around a rigid sphere translating steadily near a wall, either in a fluid at rest or in the presence of a uniform shear. Non-rotating and freely rotating spheres subject to a…
The fluid-structure interaction between a thin circular disk and its turbulent wake is investigated experimentally and described with a low-order stochastic model. The disk faces a uniform flow at Reynolds number Re=133 000 and can rotate…
This study numerically examines the influences of transverse annulation around a cone surface on the characteristics of a flow over an orthocone. This work is inspired by Spyroceras, a fossilized genus of the nautiloid family during the…
Large Eddy Simulations (LES) are used to study the effects of veer (the height-dependent lateral deflection of wind velocity due to Coriolis acceleration) on the evolution of wind turbine wakes. Specifically, this work focuses on turbines…
The present work investigates sidewall effects on the characteristics of three-dimensional (3D) compressible flows over a rectangular cavity with aspect ratios of $L/D=6$ and $W/D=2$ at $Re_D=10^4$ using large eddy simulations (LES). For…
We present an asymptotic theory for analytical characterization of the high-Reynolds-number incompressible flow of a Newtonian fluid past a shear-free circular cylinder. The viscosity-induced modifications to this flow are localized and…
A corrugated structure, rather than a smooth surface, is a characteristic feature of insect wings (e.g., dragonfly wings), which enhances their aerodynamic performance at low Reynolds numbers ($Re \simeq O(10^3)$). However, the mechanisms…
High-fidelity large-eddy simulations of the flow around two rectangular obstacles are carried out at a Reynolds number of 10,000 based on the free-stream velocity and the obstacle height. The incoming flow is a developed turbulent boundary…
Flapping animal flight is often modeled as a combined pitching and heaving motion in order to investigate the unsteady flow structures and resulting forces that could augment the animal's lift and propulsive capabilities. This work isolates…
We investigate the Reynolds-shear-stress carrying structures in the outer layer of non-equilibrium pressure-gradient turbulent boundary layers using four direct numerical simulation databases, two cases of non-equilibrium pressure-gradient…
Flapping-based propulsive systems rely on fluid-structure interactions to produce thrust. At intermediate and high Reynolds numbers, vortex formation and organization in the wake of such systems are crucial for the generation of a…
Droplet impact in airflow environments is ubiquitous in nature and industry, making the understanding of this multiphase behavior crucial for technologies such as anti-icing and spray cooling. In this study, the dynamics of droplet impact…
The leading edge vortex (LEV) is one of the most important lift augmentation mechanisms in flapping wing aerodynamics. We propose a methodology that aims to provide a quantitative description of the LEV. The first step of the method…