Related papers: Optomechanical Inertial Sensors
We present a novel optomechanical inertial sensor for low frequency applications and corresponding acceleration measurements. This sensor has a resonant frequency of 4.7Hz, a mechanical quality factor of 476k, a test mass of 2.6 gram, and a…
Compact, high-precision inertial sensors are needed to isolate many modern physics experiments from disturbances caused by seismic motion. We present a novel inertial sensor whose mechanical oscillator fits on a standard one-inch diameter…
We discuss the design of quantum hybrid inertial sensor that combines an optomechanical inertial sensor with the retro-reflector of a cold atom interferometer. This sensor fusion approach provides absolute and high accuracy measurements…
We present a highly compact and fully monolithic optomechanical accelerometer fabricated of a single wafer of fused-silica with a total volume of less than 2cc and a total mass of approximately 4 grams. This sensor demonstrates an…
An inertial sensor design is proposed in this paper to achieve high sensitivity and large dynamic range in the sub-Hz frequency regime. High acceleration sensitivity is obtained by combining optical cavity readout systems with…
High-precision inertial sensing and gravity sensing are key in navigation, oil exploration, and earthquake prediction. In contrast to prior accelerometers using piezoelectric or electronic capacitance readout techniques, optical readout…
High precision interferometers such as gravitational-wave detectors require complex seismic isolation systems in order to decouple the experiment from unwanted ground motion. Improved inertial sensors for active isolation potentially…
Future gravitational wave observatories require significant advances in all aspects of their seismic isolation; inertial sensors being a pressing example. Inertial sensors using gram-scale high mechanical Q factor (Q) glass resonators…
Atom-interferometric quantum sensors could revolutionize navigation, civil engineering, and Earth observation. However, operation in real-world environments is challenging due to external interference, platform noise, and constraints on…
We present a compact heterodyne laser interferometer developed for high-sensitivity displacement sensing applications. This interferometer consists of customized prisms and waveplates assembled as a quasi-monolithic unit to realize a…
We present a compact, fibre-coupled interferometer with high sensitivity and a large working range. We propose to use this interferometer as a readout mechanism for future inertial sensors, removing a major limiting noise source, and in…
We present an optomechanical accelerometer with high dynamic range, high bandwidth and read-out noise levels below 8 ${\mu}$g/$\sqrt{\mathrm{Hz}}$. The straightforward assembly and low cost of our device make it a prime candidate for…
Nanomechanical resonators can now be realized that achieve fundamental resonance frequencies exceeding 1 GHz, with quality factors (Q) in the range 1,000 - 100,000. The minuscule active masses of these devices, in conjunction with their…
A vacuum compatible cryogenic accelerometer is presented which will reach $<0.5$ p$g$ Hz$^{-1/2}$ sensitivity from 1 mHz to 10 Hz with a maximum sensitivity of 10 f$g$ Hz$^{-1/2}$ around 10 Hz. This figure can be translated to a…
We have developed an inertially sensitive optomechanical laser by combining a Vertical-External-Cavity Surface-Emitting Laser with a monolithic fused silica resonator. By placing the external cavity mirror of the VECSEL onto the…
Inertial sensors based on cold atom interferometry exhibit many interesting features for applications related to inertial navigation, particularly in terms of sensitivity and long-term stability. However, at present the typical atom…
Extending the sensitivity of terrestrial gravitational-wave detectors below 20 Hz is a long-standing challenge, limited by ground motion and inertial sensing noise. In this letter, we demonstrate ultra-high-vacuum compatible inertial…
Recent advances in glass fabrication technology have allowed for the development of high-precision inertial sensors in devices weighing in the order of grams. Gram-scale inertial sensors can be used in many applications with tight space or…
Onboard electrostatic suspension inertial sensors are important applications for gravity satellites and space gravitational wave detection missions, and it is important to suppress noise in the measurement signal. Due to the complex…
We experimentally demonstrate stable trapping of a permanent magnet sphere above a lead superconductor, in vacuum pressures of $4 \times 10^{-8}$~mbar. The levitating magnet behaves as a harmonic oscillator, with frequencies in the 4-31~Hz…