Related papers: Fully phase-stabilized 1 GHz turnkey frequency com…
Optical frequency combs, coherent light sources that connect optical frequencies with microwave oscillations, have become the enabling tool for precision spectroscopy, optical clockwork and attosecond physics over the past decades. Current…
We demonstrate two fully and tightly phase locked 750 MHz ytterbium (Yb) fiber frequency combs that are independently stabilized to a continuous wave (CW) laser with <1 rad RMS phase error. A bulk EOM and a single stack PZT are separately…
We demonstrate low-noise Kerr soliton frequency combs with repetition rates below 1~GHz in ultrahigh-Q crystalline magnesium fluoride resonators. Single soliton states with repetition rates of 0.90 GHz, 1.19 GHz, 1.59 GHz, 2.48 GHz, and…
Dual-comb sources with equally spaced and low phase noise frequency lines are of great importance for high resolution spectroscopy and metrology. In the terahertz frequency range, electrically pumped semiconductor quantum cascade lasers…
Frequency combs are powerful tools for many applications and high performances are achieved by stabilizing these lasers. For operation in the mid-infrared, quantum cascade lasers (QCL) are ideal candidates as they present numerous…
Laser frequency combs are coherent light sources that simultaneously provide pristine frequency spacings for precision metrology and the fundamental basis for ultrafast and attosecond sciences. Recently, nonlinear parametric conversion in…
We present a fully stabilized 1-GHz Yb-fiber laser frequency comb built on silica substrates, utilizing "optical cubes" to house all optical components, ensuring long-term stability and practical operation. Both the femtosecond laser and…
Modelocked frequency comb lasers have always operated with a single pulse circulating in the laser cavity. This meant that each laser technology had an associated limit on pulse repetition rate. Achieving higher rates required different…
We report a mode-locked Ti:sapphire femtosecond laser with 5GHz repetition rate. Spectral broadening of the 24 fs pulses in a microstructured fiber yields an octave-spanning spectrum and permits self-referencing and active stabilization of…
A fully stabilized frequency comb is essential for precision metrology and coherent optical synthesis. However, fully-stabilized frequency combs generally require separate stages for supercontinuum generation (SCG) and self-referencing,…
We demonstrate an optical frequency comb based on an erbium-doped-fiber femtosecond laser with the nonlinear polarization evolution scheme. The repetition rate of the laser is about 209 MHz. By controlling an intra-cavity electro-optic…
We demonstrate a 0.95 GHz repetition rate fully stabilized Yb:fiber frequency comb without optical amplification. Benefitted from the high mode power and high coherence, this comb achieved 35 dB to 42 dB signal to noise ratio on the direct…
We present homogeneous quantum cascade lasers (QCLs) emitting around 3 THz which display bandwidths up to 950 GHz with a single stable beatnote. Devices are spontaneously operating in a harmonic comb state, and when in a dense mode regime…
Optical frequency combs provide a phase-coherent interface between optical and microwave domains, underpinning advances in precision metrology, spectroscopy, and time-frequency transfer. Most conventional comb architectures are limited to…
A continuous-wave Fabry-Perot quantum cascade laser (QCL) emitting at 8.1 $\mu$m operating in the single mode regime has been coherently phase locked to a turn-key low-noise commercial mid-Infrared (mid-IR) optical frequency comb. The…
We demonstrate the use of a flexible digital servo system for the optical stabilization of both the repetition rate and carrier-envelope offset frequency of a laser frequency comb. The servo system is based entirely on a low-cost field…
Robust control and stabilization of optical frequency combs enables an extraordinary range of scientific and technological applications, including frequency metrology at extreme levels of precision, novel spectroscopy of quantum gases and…
Optical frequency combs based on mode-locked lasers have proven to be invaluable tools for a wide range of applications in precision spectroscopy and metrology. A novel principle of optical frequency comb generation in whispering-gallery…
Using a turn-key Ti:sapphire femtosecond laser frequency comb, an off-the-shelf supercontinuum device, and Fabry-Perot mode filters, we report the generation of a 16 GHz frequency comb spanning a 90 nm band about a center wavelength of 566…
Dual-frequency comb spectroscopy permits broadband precision spectroscopic measurements with short acquisition time. A dramatic improvement of the maximal spectral bandwidth and the minimal measurement time can be expected when the lasers'…