Related papers: Prediction of separation and transition on a low-p…
The present study investigates influence of compressibility on separation induced transition in a low pressure turbine cascade using high fidelity direct numerical simulations of the T106A blade. Simulations are performed for inlet Mach…
We present results of implicit large eddy simulation (LES) and different Reynolds-averaged Navier-Stokes (RANS) models of the MTU 161 low pressure turbine at an exit Reynolds number of 90,000 and exit Mach number of 0.6. The LES results are…
Predictive simulation of many complex flows requires moving beyond Reynolds-averaged Navier-Stokes (RANS) based models to representations resolving at least some scales of turbulence in at least some regions of the flow. To resolve…
Reliably predictive simulation of complex flows requires a level of model sophistication and robustness exceeding the capabilities of current Reynolds-averaged Navier-Stokes (RANS) models. The necessary capability can often be provided by…
Separated flow transition is a very popular phenomenon in gas turbines, especially low-pressure turbines (LPT). Low-fidelity simulations are often used for gas turbine design. However, they are unable to predict separated flow transition…
The Reynolds-Averaged Navier-Stokes (RANS) approach remains a backbone for turbulence modeling due to its high cost-effectiveness. Its accuracy is largely based on a reliable Reynolds stress anisotropy tensor closure model. There has been…
Most of the turbulence models in practice are based on the assumption of a linear relation between Reynolds stresses and mean flow strain rates which generally provides a good approximation in case of attached and fully turbulent flows. A…
We present direct numerical simulations (DNSs) of bypass transition over a flat plate with inlet freestream turbulence intensity levels of 0.75%, 1.5%, 2.25%, 3.0%, and 6.0%, respectively. A new definition of the transition intermittency is…
Turbulence modeling is a critical component in numerical simulations of industrial flows based on Reynolds-averaged Navier-Stokes (RANS) equations. However, after decades of efforts in the turbulence modeling community, universally…
Computational fluid dynamics (CFD) is a useful tool for prediction of turbulence in aerodynamic and biomedical applications. The choice of appropriate turbulence models is key to reaching accurate predictions. The present investigation…
The present study assesses RANS-based turbulence models to simulate isothermal flow in a combustor representing a constituent can combustor of can-annular configuration used in jet engines. Two-equation models (standard $k-\epsilon$,…
This work determines the inaccuracy of using Reynolds averaged Navier Stokes (RANS) turbulence models in transition to turbulent flow regimes by predicting the model-based discrepancies between RANS and large eddy simulation (LES) models…
A new approach to turbulence simulation, based on a combination of large-eddy simulation (LES) for the whole flow and an array of non-space-filling quasi-direct numerical simulations (QDNS), which sample the response of near-wall turbulence…
In many engineering and industrial applications, the investigation of rotating turbulent flow is of great interest. In rotor-stator cavities, the centrifugal and Coriolis forces have a strong influence on the turbulence by producing a…
The goal of this dissertation is to investigate the PANS model capabilities in providing significant improvement over RANS predictions at slightly higher computational expense and producing LES quality results at significantly lower…
A numerical study for a hydrogen (H2) jet in an air crossflow (JICF) was performed using direct numerical simulation (DNS), large eddy simulation (LES), and Reynolds-averaged Navier-Stokes (RANS) approaches, based on a geometry…
This study constitutes the second phase of a research endeavor aimed at evaluating the feasibility of employing Long Short-Term Memory (LSTM) neural networks as a replacement for Reynolds-Averaged Navier-Stokes (RANS) turbulence models. In…
Hybrid Reynolds-averaged Navier Stokes large eddy simulation (RANS LES) methods have become popular for simulation of massively separated flows at high Reynolds numbers due to their reduced computational cost and good accuracy. The current…
This work extends a pressure-gradient sensor for boundary-layer separation originally developed for the $k-\omega$ shear-stress transport Reynolds-averaged Navier-Stokes (RANS) model (Griffin et al., 2025, J. Turb.) to the Improved Delayed…
In this paper, a novel zonal machine learning (ML) approach for Reynolds-averaged Navier-Stokes (RANS) turbulence modelling based on the divide-and-conquer technique is introduced. This approach involves partitioning the flow domain into…