Related papers: Study of Reactively Sputtered Nickel Nitride Thin …
In this work we investigate the process of iron nitride (Fe-N) phase formation using 2 at.% Al or 2 at.% Ti as additives. The samples were prepared with a magnetron sputtering technique using different amount of nitrogen during the…
We report a synthesis route to grow iron nitride thin films with giant saturation magnetization (Ms) through an N inter-diffusion process. By post annealing Fe/Fe-N structured films grown on GaAs(001) substrates, nitrogen diffuses from the…
Zinc nitride films were synthesized by reactive radio frequency (rf) magnetron sputtering of a zinc target using an Ar+N2 mixture. The as-deposited films were annealed in the air and O2 at 300 {\deg}C for 1 hr. The XRD measurements…
Magnetic anisotropy in disordered rare-earth-transition metals (RE-TM) compounds arises from RE atoms occupying asymmetric environments within the TM lattice. However, the underlying mechanism that promotes such environments remains not…
We have carried out a detailed programme to explore the superconducting characteristics of reactive DC-magnetron sputtered NbN. The basic principle is to ignite a plasma using argon, and then to introduce a small additional nitrogen flow to…
We have carried out a detailed programme to explore the superconducting characteristics of reactive DC-magnetron sputtered NbN. The basic principle is to ignite a plasma using argon, and then to introduce a small additional nitrogen flow to…
We fabricated NiFe2O thin films on MgAl2O4 (001) substrates by reactive dc magnetron co-sputtering in a pure oxygen atmosphere at different substrate temperatures. The film properties were investigated by various techniques with a focus on…
The structural and electrical properties of Ti-N films deposited by reactive sputtering depend on their growth parameters, in particular the Ar:N2 gas ratio. We show that the nitrogen percentage changes the crystallographic phase of the…
The influence of the buffer layer of hafnia dielectric on superconducting properties of niobium nitride films, produced by the technique of the reactive magnetron depositing has been investigated for the first time. This study presents a…
Mn-based nitrides with antiperovskite structures have several properties that can be utilised for antiferromagnetic spintronics. Their magnetic properties depend on the structural quality, composition and doping of the cubic antiperovskite…
Boron carbide thin films of different thicknesses deposited by ion beam sputtering were studied. The deposited films were characterized by grazing incidence hard x-ray reflectivity (GIXR), resonant soft x-ray reflectivity (RSXR), x-ray…
NiFe$_2$O$_4$ thin films with varying thickness were grown on SrTiO$_3$(001) by reactive molecular beam epitaxy. Soft and hard x-ray photoelectron spectroscopy measurements reveal a homogeneous cation distribution throughout the whole film…
A combinatorial thin-film synthesis approach combined with a high throughput analysis methodology was successfully applied to synthesize TiN/Ni coatings with optimum mechanical properties. The synthesis approach consists of the deposition…
Titanium nitride is a material of interest for many superconducting devices such as nanowire microwave resonators and photon detectors. Thus, controlling the growth of TiN thin films with desirable properties is of high importance. In…
We investigated high-frequency behavior of FeN thin films prepared by reactive sputtering through ferromagnetic resonance (FMR) and its relationship with the static magnetic properties. The FMR was observed in the frequency range from 2 to…
We have investigated properties of superconducting titanium nitride (TiN) films that were sputtered over a large range of RF-induced DC bias voltage applied to the substrate. Films grown with the largest bias voltages contained cubic TiN…
Metal nitrides possess exceptional catalytic, electronic and physical properties making them widely used in (opto-)electronics and as hard coatings. When used as films in surface-active applications, however, their performance remains…
Thin films of iron and permalloy Ni80Fe20 were prepared using an Ar+N2 mixture with magnetron sputtering technique at ambient temperature. The nitrogen partial pressure, during sputtering process was varied in the range of 0 to 100%,…
Hybrid systems consisting of metal-fullerene composites exhibit intriguing properties but often suffer from thermal instability. With proper control, such instability can be harnessed to enable the formation of sophisticated nanostructures…
A route to break molecular nitrogen (N2) under mild conditions is demonstrated by N2 gas cracking on, and incorporation into, lanthanide films. Successful growth of lanthanide nitride thin films, made by evaporation of lanthanides in a…