Related papers: 4D-STEM elastic stress state characterisation of a…
A Twinning Induced Plasticity (TWIP) steel with a nominal composition of Fe-16.4Mn-0.9C-0.5Si-0.05Nb-0.05V was deformed to an engineering strain of 6\%. The strain around the deformation twins were mapped using the 4D-STEM technique. Strain…
The microstructural mechanisms governing energy storage during plastic deformation of twinning-induced plasticity (TWIP) steels remain insufficiently understood, particularly under conditions of strain localization. This study provides a…
Friction and wear of metals are critically influenced by the microstructures of the bodies constituting the tribological contact. Understanding the microstructural evolution taking place over the lifetime of a tribological system therefore…
High-manganese twinning-induced plasticity (TWIP) steels exhibit high strain hardening, high tensile strength, and high ductility, which make them attractive for structural applications. At low tensile strain rates, TWIP steels are prone to…
A medium Mn steel of composition Fe-4.8Mn-2.8Al-1.5Si-0.51C (wt.\%) was processed to obtain two different microstructures representing two different approaches in the hot rolling mill, resulting in equiaxed vs. a mixed equiaxed and lamellar…
Plastic deformation of metallic alloys usually takes place through slip, but occasionally involves twinning. In particular, twinning is important in hexagonal close packed materials where the easy slip systems are insufficient to…
Tensile twinning is a main deformation mode in hexagonal close packed structure metals, so it is important to comprehensively understand twinning mechanisms which are not fully disclosed using 2D or small volume 3D characterization…
There is growing interest in promoting deformation twinning for plasticity in advanced materials, as highly organized twin boundaries are beneficial to better strength-ductility combination in contrast to disordered grain boundaries.…
Synchrotron Laue microdiffraction and Digital Image Correlation measurements were coupled to track the elastic strain field (or stress field) and the total strain field near a general grain boundary in a bent bicrystal. A 316L stainless…
Deformation twinning is an important deformation mechanism in a variety of materials, including metals and ceramics. This deformation mechanism is particularly important in low-symmetry hexagonal close-packed (hcp) metals such as Magnesium…
Metallic materials, especially steel, underpin transportation technologies. High-manganese twinning induced plasticity (TWIP) austenitic steels exhibit exceptional strength and ductility from twins, low-energy microstructural defects that…
Microstructural evolution in metallic materials feedbacks with the loading conditions and influences the life time of parts and components. Therefore, the deformation mechanisms have to be fundamentally understood. Tribological loading…
Zirconium alloys are used in the nuclear industry as structural materials, and can be subject to high strain rate loading conditions during forming and in the case of a reactor accident. In this context, the relationship between strain rate…
Nanoindentation is a widely used method for sensitive exploration of the mechanical properties of micromechanical systems. We derived an empirical analysis technique to extract stress-strain field gradient and divergence representations…
Twinning is an important deformation mode in plastically deformed hexagonal close-packed materials. The extremely high twin growth rates at the nanoscale make atomistic simulations an attractive method for investigating the role of…
The elastoplastic behavior of a two-phase stainless steel alloy is explored at the crystal scale for five levels of stress biaxiality. The crystal lattice (elastic) strains were measured with neutron diffraction using tubular samples…
A new $\beta$-metastable Ti-alloy is designed with the aim to obtain a TWIP alloy but positioned at the limit between the TRIP/TWIP and the TWIP dominated regime. The designed alloy exhibits a large ductility combined with an elevated and…
The present work deals with the microstructure and texture evolutions of a TWIP high entropy alloy at various temperatures. Toward this end, the tensile tests were conducted at temperatures ranging from 298 to 873 K under the strain rate of…
Twinning induced plasticity (TWIP) steels are high strength metallic materials with potential for structural components in e.g. automotive applications. However, they are prone to hydrogen embrittlement (HE) and galvanic corrosion. We…
The objective of this work is to deconvolute the interaction of slip, twinning, and notch on the deformation response of an austenitic manganese (Hadfield) steel using detailed finite element simulations. The simulations employ a…