Related papers: Real-Time Monitoring of Area Angles with Synchroph…
When power grids are heavily stressed with a bulk power transfer, it is useful to have a fast indication of the increased stress when multiple line outages occur. Reducing the bulk power transfer when the outages are severe could forestall…
The area angle is a scalar measure of power system area stress that responds to line outages within the area and is a combination of synchrophasor measurements of voltage angles around the border of the area. Both idealized and practical…
Real-time tracking of inertia is important because it reflects the power system's ability to withstand contingencies and maintain frequency security. This paper proposes a practical approach to estimate inertia using ambient phasor…
Wide Area Measurement Systems (WAMS) can guide system operators' to increase their situational awareness by expanding observability of their supervise area and adjoining systems. Power system oscillations in the electrical grid are a matter…
The outage of a transmission line may change the system phase angle differences to the point that the system experience stress conditions. Hence, the angle differences for post-contingency condition of a transmission lines should be…
Wide-area synchrophasor ambient measurements provide a valuable data source for real-time oscillation mode monitoring and analysis. This paper introduces a novel method for identifying inter-area oscillation modes using wide-area ambient…
We consider the fast monitoring of voltage collapse margin using synchrophasor measurements at both ends of transmission lines that transfer power from two generators to two loads. This shows a way to extend the monitoring of a radial…
Since transmission lines are crucial links in the power system, one line outage event may bring about interruption or even cascading failure of the power system. If a quick and accurate line outage detection and localization can be…
Wide-area dynamic studies are of paramount importance to ensure the stability and reliability of power grids. The rising deployment synchrophasor and other sensing technologies has made data-driven modeling and analysis possible using the…
Power quality monitoring has become a vital need in modern power systems owing to the need for agile operation and troubleshooting scheme. On the other hand, the nature of load in modern power system is changing in many ways. Digital loads,…
Integration of intermittent renewable energy sources in modern power systems is increasing very fast. Replacement of synchronous generators with zero-to-low variable renewables substantially decreases the system inertia. In a large system,…
Ambient Forcing is a novel method to sample random states from manifolds of differential-algebraic equations (DAE). These states can represent local perturbations of nodes in power systems with loads, which introduces constraints into the…
An active-sensing-based learning algorithm is proposed to solve the near-field beam alignment problem with the aid of wavenumber-domain transform matrices (WTMs). Specifically, WTMs can transform the antenna-domain channel into a sparse…
This paper proposes a novel approach to estimate the steady-state angle stability limit (SSASL) by using the nonlinear power system dynamic model in the modal space. Through two linear changes of coordinates and a simplification introduced…
In this paper, a novel pinching antenna-aided spatial multiplexing (PASM) architecture is conceived, which intrinsically amalgamates the benefits of flexible radiating element placement with radio-frequency (RF) chain transmission.…
We propose a novel sensing approach for the beam alignment problem in millimeter wave systems using a single Radio Frequency (RF) chain. Conventionally, beam alignment using a single phased array involves comparing beamformer output power…
It is important for detecting the anomaly in power systems before it expands and causes serious faults such as power failures or system blackout. With the deployments of phasor measurement units (PMUs), massive amounts of synchrophasor…
Movable antenna (MA) is a new technology with great potential to improve communication performance by enabling local movement of antennas for pursuing better channel conditions. In particular, the acquisition of complete channel state…
Angle power spectrum (APS) characterizes the directional distribution of received signal power and is directly relevant to beam management and MIMO processing. While environment-aware learning has been widely studied for radio maps and path…
Beam management is central in the operation of beamformed wireless cellular systems such as 5G New Radio (NR) networks. Focusing the energy radiated to mobile terminals (MTs) by increasing the number of beams per cell increases signal power…