Related papers: Evaluation and mitigation of trace $^{210}$Pb cont…
We established a method to assay $^{210}$Pb and $^{210}$Po contaminations in the bulk of copper samples using a low-background alpha particle counter. The achieved sensitivity for the $^{210}$Pb and $^{210}$Po contaminations reaches a few…
Radioactive contaminants on the surfaces of detector components can be a problematic source of background events for physics experiments searching for rare processes. Exposure to radon is a specific concern because it can result in the…
A potential source of dominant backgrounds for many rare-event searches or screening detectors is from radon daughters, specifically $^{210}$Pb, deposited on detector surfaces, often during detector fabrication. Performing a late-stage etch…
$^{210}Po$ $\alpha$-decay driven neutron background is a concern for many rare event search experiments. It is a difficult to control background because its radiogenic component depends on the air exposure history of parts. In this study,…
The next generation low-background detectors operating deep underground aim for unprecedented low levels of radioactive backgrounds. The deposition and presence of radon progeny on detector surfaces is an added source of energetic…
The surface $^{210}$Pb is one of the main background sources for dark-matter-search experiments using NaI(Tl) crystals, and its spectral features associated with the beta-decay events for energies less than 60 keV depends on the depth…
In this work, we present a fast and highly efficient method for the measurement of $^{210}$Pb in metallic archaeological lead using the commercial low-background liquid scintillation counter Wallac Quantulus 1220 installed at the University…
Radon and its progeny constitute a major source of background in rare-event physics experiments, such as those searching for dark matter, neutrinos, and neutrinoless double beta decay, due to their origin as unavoidable decay products of…
The corrosion resistance of an electroplated (EP) Zn coating whose surface was chemically etched to produce surface defects (pores) is investigated in this work. Impedance and DC polarisation measururements were employed to study the…
We develop highly corrosion-resistant and conductive Ti-Nb-O coatings for metallic components -- bipolar plates (BPPs) and porous transport layers (PTLs) -- in PEM water electrolyzers. Using reactive high-power impulse magnetron sputtering…
We use first-principles methods to investigate the adsorption of Cu, Pb, Ag, and Mg onto a H-terminated Si surface. We show that Cu and Pb can adsorb strongly while Ag and Mg are fairly inert. In addition, two types of adsorption states are…
Electropolishing is the premier surface preparation method for high-Q, high-gradient superconducting RF cavities made of Nb. This leaves behind an apparently smooth surface, yet the achievable peak magnetic fields fall well below the…
The Boulby UnderGround Screening (BUGS) facility, located at the Boulby Underground Laboratory, has significantly advanced its material screening capabilities by installing two XIA UltraLo-1800 alpha particle detectors. This study presents…
In this research, wettability control by area fraction of laser ablated surface of copper is presented. The functional surfaces with full wettability control from highly hydrophilic to super-hydrophobic were created on copper by nanosecond…
It has been known that decays of daughter elements of $^{222}$Rn on the surface of a detector cause significant background at energies below 10 keV. In particular $^{210}$Pb and $^{210}$Po decays on the crystal surface result in significant…
Archeological Roman lead (Pb) is known to be a suitable material for shielding experimental apparata in rare event searches. In the past years the intrinsic radiopurity of this material was investigated using different technologies. In this…
Heavy metal pollution is a severe environmental problem affecting many water resources. The non-biodegradable nature of the heavy metals such as lead (Pb) causes severe human health issues, so their cost-effective, sensitive and rapid…
Inductively coupled plasma mass spectroscopy is a powerful technique for measuring trace levels of radioactive contaminants, specifically Th and U, in materials for use in construction of low-background rare-event detectors such as double…
Electropolishing has found wide application as the final surface treatment of metal products in mechanical engineering and instrumentation, medicine and reflective concentrators for PV cells. It was found that electropolishing (EP) not only…
The Nab (Neutron a b) experiment is designed to measure the beta-antineutrino angular correlation in free neutron $\beta$ decay with an ultimate precision goal of 0.1%, providing input for tests of Cabibbo-Kobayashi-Maskawa (CKM) matrix…