Related papers: A superconducting detector that counts microwave p…
Single-photon detectors (SPDs) at near infrared wavelengths with high system detection efficiency (> 90%), low dark count rate (< 1 counts per second, cps), low timing jitter (< 100 ps), and short reset time (< 100 ns) would enable landmark…
We investigate the detection of an ultra-bright single-photon source using highly efficient superconducting nanowire single-photon detectors (SNSPDs) at telecom wavelengths. Both the single-photon source and the detectors are characterized…
The microwave-driven dynamics of the superconducting phase difference across a Josephson junction is now widely employed in superconducting qubits and quantum circuits. With the typical energy level separation frequency of several GHz,…
Path-entangled multi-photon states allow optical phase-sensing beyond the shot-noise limit, provided that an efficient parity measurement can be implemented. Realising this experimentally is technologically demanding, as it requires…
A photon-number-resolving detector based on a four-element superconducting nanowire single photon detector is demonstrated to have sub-30-ps resolution in measuring the arrival time of individual photons. This detector can be used to…
Generally, a superconducting nanowire single-photon detector (SNSPD) is composed of wires with a typical width of ~100 nm. Recent studies have found that superconducting strips with a micrometer-scale width can also detect single photons.…
Interference between an unknown two-photon state (a "biphoton") and the two-photon component of a reference state gives a phase-sensitive arrival-time distribution containing full information about the biphoton temporal wave function. Using…
We describe a new biasing scheme for single photon detectors based on superconducting tunnel junctions. It replaces a single detector junction with a circuit of three junctions and achieves biasing of a detector junction at subgap currents…
We demonstrate niobium nitride based superconducting single-photon detectors sensitive in the spectral range 452 nm - 2300 nm. The system performance was tested in a real-life experiment with correlated photons generated by means of…
We demonstrate fast counting and multiphoton detection abilities of a Silicon Photo Multiplier (SiPM). In fast counting mode we are able to detect two consecutive photons separated by only 2.3 ns corresponding to 430 MHz. The counting…
We demonstrate a superconducting photon-number-resolving detector capable of resolving up to twelve photons at telecommunication wavelengths. It is based on a series array of twelve superconducting NbN nanowire elements, each connected in…
We experimentally demonstrate a high-fidelity visible-to-telecommunication wavelength conversion of a photon by using a solid-state-based difference frequency generation. In the experiment, one half of a pico-second visible entangled photon…
It was investigated the possibility of creating NbN superconducting single-photon detectors with saturated dependence of quantum efficiency versus normalized bias current. It was shown that the saturation increases for the detectors based…
A Josephson junction (JJ) has been under intensive study ever since 1960's. Yet even in the present era of building quantum information processing devices based on many JJs, open questions regarding a single junction remain unsolved, such…
A model of single photon detection, illustrated by a photon-absorbing superfluid or superconducting microvolume, is formulated as a cascading pair of quantum phase transitions. In the first, the microvolume transitions to the normal state…
We present an experimental scheme that achieves ideal phase detection on a two-mode field. The two modes $a$ and $b$ are the signal and image band modes of an heterodyne detector, with the field approaching an eigenstate of the photocurrent…
Superconducting nanowire single-photon detectors (SNSPDs) perform single-photon counting with exceptional sensitivity and time resolution at near-infrared wavelengths. State-of-the-art SNSPDs, based on 100 nm-wide, 4 to 5 nm thick NbN…
In this article, we present an experimental study of a Josephson junction -based high-impedance resonator. By taking the resonator to the limit of consisting effectively only of one junction, results in strong non-linear effects already for…
We report on the fabrication and characterization of a two-terminal mesoscopic interferometer based on three V/Cu/V Josephson junctions having nanoscale cross-section. The junctions have been arranged in a double-ring geometry realized by…
A pulse-and-hold technique is used to measure the switching of small critical current Josephson junctions. This technique allows one to achieve a good binary detection and therefore measure switching probabilities. The technique overcomes…