Related papers: Outdoor mmWave Base Station Placement: A Multi-Arm…

This paper presents a comparative study on millimeter wave (mmWave) location-based analog beamforming (BF) techniques based on channel estimation. Localization and compressive sensing (CS) effectively reduces mmWave BF complexity and…

Beam alignment is required in millimeter wave communication to ensure high data rate transmission. However, with narrow beamwidth in massive MIMO, beam alignment could be computationally intensive due to the large number of beam pairs to be…

Millimeter wave (mmWave) communication systems can provide high data rates but the system performance may degrade significantly due to mobile blockers and the user's own body. A high frequency of interruptions and long duration of blockage…

Millimeter wave (MmWave) systems are vulnerable to blockages, which cause signal drop and link outage. One solution is to deploy reconfigurable intelligent surfaces (RISs) to add a strong non-line-of-sight path from the transmitter to…

We consider the following positioning problem where several base stations (BS) try to locate a user equipment (UE): The UE sends a positioning signal to several BS. Each BS performs Angle of Arrival (AoA) measurements on the received…

In future wireless networks, the availability of information on the position of mobile agents and the propagation environment can enable new services and increase the throughput and robustness of communications. Multipath-based simultaneous…

Spatial Reuse (SR) has recently gained attention to maximize the performance of IEEE 802.11 Wireless Local Area Networks (WLANs). Decentralized mechanisms are expected to be key in the development of SR solutions for next-generation WLANs,…

Reconfigurable intelligent surface (RIS) has recently emerged as a promising paradigm for future cellular networks. Specifically, due to its capability in reshaping the propagation environment, RIS was introduced to address the blockage…

Millimeter Wave (mm-w), especially the 60 GHz band, has been receiving much attention as a key enabler for the 5G cellular networks. Beamforming (BF) is tremendously used with mm-w transmissions to enhance the link quality and overcome the…

Sensing capabilities as an integral part of the network have been identified as a novel feature of sixth-generation (6G) wireless networks. As a key driver, millimeterwave (mmWave) communication largely boosts speed, capacities, and…

Millimeter wave (mmWave) multiple-input multiple-output (MIMO) systems capable of integrated sensing and communication (ISAC) constitute a key technology for connected autonomous vehicles (CAVs). In this context, we propose a multi-beam…

The paper addresses the problem of determining the unknown position of a mobile station for a mmWave MISO system. This setup is motivated by the fact that massive arrays will be initially implemented only on 5G base stations, likely leaving…

Mobile base stations on board unmanned aerial vehicles (UAVs) promise to deliver connectivity to those areas where the terrestrial infrastructure is overloaded, damaged, or absent. A fundamental problem in this context involves determining…

We consider the problem of spatial signal design for multipath-assisted mmWave positioning under limited prior knowledge on the user's location and clock bias. We propose an optimal robust design and, based on the low-dimensional precoder…

The next generations of vehicles will require data transmission rates in the order of terabytes per driving hour, to support advanced automotive services. This unprecedented amount of data to be exchanged goes beyond the capabilities of…

Huge overhead of beam training imposes a significant challenge in millimeter-wave (mmWave) wireless communications. To address this issue, in this paper, we propose a wide beam based training approach to calibrate the narrow beam direction…

This paper studies the deployment of multiple movable antennas (MAs) at the base station (BS) for enhancing the multiuser communication performance. First, we model the multiuser channel in the uplink to characterize the wireless channel…

Multiple-input multiple-output (MIMO) millimeter wave (mmWave) communication is a key technology for next generation wireless networks. One of the consequences of utilizing a large number of antennas with an increased bandwidth is that…

5G millimeter wave (mmWave) technology is envisioned to be an integral part of next-generation vehicle-to-everything (V2X) networks and autonomous vehicles due to its broad bandwidth, wide field of view sensing, and precise localization…

Millimeter wave (mmWave) massive multiple-input multiple-output (MIMO) communication system is expected to achieve enormous transmission rate, provided that the transmit and receive beams are properly aligned with the MIMO channel. However,…