Related papers: High-Efficiency Inductive Output Tubes using a 3rd…

For the 5th Generation (5G) networks, Third Generation Partnership Project (3GPP) is considering standardization of various solutions for traffic aggregation using licensed and unlicensed spectrum, to meet the rising data demands. IP Flow…

A high accuracy and high sensitivity system architecture is proposed for the read-out circuit of electrical impedance tomography system-on-chip. The switched ratiometric technique is applied in the proposed architecture. The proposed system…

Reduction in power consumption has become a major criterion of design in modern ICs. One such scheme to reduce power consumption by an IC is the use of multiple power supplies for critical and non-critical paths. To maintain the impedance…

Edge computing-based 3D perception has received attention in intelligent transportation systems (ITS) because real-time monitoring of traffic candidates potentially strengthens Vehicle-to-Everything (V2X) orchestration. Thanks to the…

A Bayesian optimization framework is used to investigate scenarios for disruptions mitigated with combined deuterium and neon injection in ITER. The optimization cost function takes into account limits on the maximum runaway current, the…

We demonstrated that the spin injection/extraction efficiency is enhanced by an ultrathin Mg insertion layer (<= 2 nm) in Fe/Mg/MgO/n+-Si tunnel junctions. In diode-type vertical three-terminal devices fabricated on a Si substrate, we…

In this paper, a new design has been proposed for the realization of high-frequency memcapacitor emulators built with three OTAs. This paper also proposes the application of memcapacitor as an amplitude modulator. Furthermore, applications…

In this paper, we propose a simulation-based novel Split-Gate Trench MOSFET structure with an optimized fabrication process to enhance power efficiency, switching speed, and thermal stability for high-performance semiconductor applications.…

This paper proposes several explicit and implicit multistep frequency response optimized integrators considering first or second order derivative. A prediction-based method aiming at accelerating a novel power system transient simulation…

In this paper, we propose a data-model-hardware tri-design framework for high-throughput, low-cost, and high-accuracy multi-object tracking (MOT) on High-Definition (HD) video stream. First, to enable ultra-light video intelligence, we…

Targeting vision applications at the edge, in this work, we systematically explore and propose a high-performance and energy-efficient Optical In-Sensor Accelerator architecture called OISA for the first time. Taking advantage of the…

Integrating unmanned aerial vehicles into daily use requires controllers that ensure stable flight, efficient energy use, and reduced noise. Proportional integral derivative controllers remain standard but are highly sensitive to gain…

We find that a donor-doped band-gap material can enhance the overall high-order harmonic generation (HHG) efficiency by several orders of magnitude, compared with undoped and acceptor-doped materials. This significant enhancement, predicted…

This paper describes the design and characteristics of monolithically integrated three-terminal gated III-Nitride light emitting diodes (LEDs) devices. The impact of channel doping and thickness on the voltage penalty of the transistor-LED…

A method for increasing efficiency of radio frequency (RF) amplifier employing laterally diffused metal oxide semiconductor (LDMOS) transistors coupled to an RF exciter depending on the emission mode of modulated RF input signals generated…

Due to the energy crisis and environmental pollution, the installed capacity of inverter-based resources (IBRs) in power grids is rapidly increasing, and grid-following control (GFL) is the most prevalent at present. Meanwhile, grid-forming…

The thermionic gridded gun is described which generates short electron bunches for further acceleration in a Nb3Sn conduction cooled SRF linac. The gun is built into the first cavity of the 250 keV injector [1] for the 20 kW, 10 MeV, 1.3…

We describe five high-voltage (60 to 550V peak to peak), high-speed (1-300ns rise time; 1.3-300MHz bandwidth) linear amplifiers for driving capacitive or resistive loads such as electro-optic modulators. The amplifiers use bipolar…

We experimentally demonstrate efficient third harmonic generation from an indium tin oxide (ITO) nanofilm (lambda/42 thick) on a glass substrate for a pump wavelength of 1.4 um. A conversion efficiency of 3.3x10^-6 is achieved by exploiting…

We report on the development of a radio frequency (RF) linear accelerator (linac) for multiple-ion beams that is made from stacks of low cost wafers. The accelerator lattice is comprised of RF-acceleration gaps and electrostatic quadrupole…