Related papers: Towards High Throughput Wireless Network with Dire…
In dense deployments of residential WiFi networks individual users suffer performance degradation due to both contention and interference. While Radio Resource Management (RRM) is known to mitigate this effects its application in…
UAV-based wireless systems, such as wireless relay and remote sensing, have attracted great attentions from academia and industry. To realize them, a high-performance wireless aerial communication system, which bridges UAVs and ground…
Movable-antenna (MA) arrays are envisioned as a promising technique for enhancing secrecy performance in wireless communications by leveraging additional spatial degrees of freedom. However, when the eavesdropper is located in the same…
Future wireless systems are likely to adopt extremely large aperture arrays to achieve higher throughput, wider coverage, and higher spatial resolution. Conventional wireless systems predominantly operate in the far field (FF) of the…
Nowadays, IEEE 802.11, i.e., Wi-Fi has emerged as a prevailing technology for broadband wireless networking. To meet the tremendous rise of demand for future generation wireless LANs, a robust and efficient MAC protocol is required for the…
Intelligent reflecting surface (IRS) is a revolutionary and low-cost technology for boosting the spectrum and energy efficiencies in future wireless communication network. In order to create controllable multipath transmission in the…
Movable antenna (MA) technology offers promising potential to enhance wireless communication by allowing flexible antenna movement. To maximize spatial degrees of freedom (DoFs), larger movable regions are required, which may render the…
In this paper, the efficient deployment of multiple unmanned aerial vehicles (UAVs) with directional antennas acting as wireless base stations that provide coverage for ground users is analyzed. First, the downlink coverage probability for…
The operating range of a single millimeter wave (mmWave) access point (AP) is small due to the high path loss and blockage issues of the frequency band. To achieve the coverage similar to conventional sub-6GHz networks, the ultra-dense…
Affine Frequency Division Multiplexing (AFDM) is considered as a promising solution for next-generation wireless systems due to its satisfactory performance in high-mobility scenarios. By adjusting AFDM parameters to match the multi-path…
This paper presents the design and the realization of a hybrid wireless Gigabit Ethernet indoor communications system operating at 60 GHz. As the 60 GHz radio link operates only in a single-room configuration, an additional Radio over Fiber…
Interference alignment promises that, in Gaussian interference channels, each link can support half of a degree of freedom (DoF) per pair of transmit-receive antennas. However, in general, this result requires to precode the data bearing…
The use of full-duplex (FD) communication systems is a new way to increase spectral efficiency. For this reason, it has received serious attention in the new generation of wireless communication systems. The main challenge of FD systems is…
The artificial noise (AN) aided multi-beam directional modulation (DM) technology is capable of wireless physical layer secure (PLS) transmissions for multiple desired receivers in free space. The application of AN, however, makes it less…
Internet of things is in progress to build a smart society, and wireless networks are critical enablers for many of its use cases. In this paper, we present a multi-coordinated transmission scheme to achieve ultra-reliability for critical…
A network relying on a large antenna-array-aided base station is designed for delivering multiple information streams to multi-antenna users over high-frequency bands such as the millimeter-wave and sub-Terahertz bands. The state-of-the-art…
Cell-free massive MIMO (multiple-input multiple-output) enhances spectral and energy efficiency compared to conventional cellular networks by enabling joint transmission and reception across a large number of distributed access points…
Relaying is an effective technique to achieve reliable wireless connectivity in harsh communication environment. However, most of the existing relaying schemes are based on relays with fixed locations, or \emph{static relaying}. In this…
Cross-Technology Interference (CTI) poses challenges for the performance and robustness of wireless networks. There are opportunities for better cooperation if the spectral occupation and technology of the interference can be detected.…
We present a new type of wireless access infras-tructure consisting of a fabric of dispersed electronic circuitsand antennas that collectively function as a massive, distributed antenna array. We have chosen to name this new wireless…